Pitney Bowes DM225 Operating Manual page 11

1. Postage Meter
2. Card Slot
3. Stacker
4. Front Access
Cover
5. Transport
Release Lever
6. Quick Reference This card has brief instructions describing how to 'frank'
Card
7. Moistener
Release Button
8. Moistener
9. Tape Feeder
10. Feed Deck
11. Meter Release
Lever
12. Power Indicator Lights when the mailing machine is on. Also flashes to
13. Alpha Keypad
Cover
Stores and controls your postage. You can remove the
Postage Meter from the Mailing Machine if you need to.
This slot accepts 'smartcards' which can contain new or
updated Town Circle and/or Ad (slogan) information.
Finished mailpieces are neatly stacked here.
Open to allow access to the print head. The Postage Meter
has to be removed before this cover will open. The cover
must be closed before the Mailing Machine will operate.
Pull the release lever forward to lower the transport deck
and clear a stalled mailpiece. The transport deck is
interlocked; the Mailing Machine won't run when it's open.
and seal an envelope. It can act as a reminder, or can help
an occasional operator use the system.
Press to remove the moistener from the Mailing Machine
(DM300 system only).
Applies sealing fluid to the envelope flap. You can seal
envelopes or leave them unsealed, depending on how you
feed them (DM300 system only).
Holds 50 tape strips for use on oversize letters and
packages. You can print tape strips individually or up to 25
strips with the same postage value (DM300 system only).
Supports your envelope as it passes under the meter stamp
printer.
Turn the lever anticlockwise to remove the meter from
the mailing machine. This automatically turns off power to
the meter.
indicate an error condition.
Open the cover to use the alpha keypad. You'll use the alpha
keypad to set up accounts and custom presets.
Introduction
1-5