Postage Mode; Seal Only; Ink Functions; Maintenance (Purging The Print Head) - Pitney Bowes DM225 Operating Manual

Configuration

Postage Mode

What is it?
Where is it?
Action...

Seal Only

What is it?
Where is it?
Action...

Ink Functions

What is it?
Where is it?
Action...

Maintenance (Purging the Print Head)

What is it?
Where is it?
Action...
3-4
Selects the meter's standard operating mode. Choose this
mode to perform all routine postage printing functions.
In the Options Menu. Select Options > Postage Mode.
The display prompts: "Mode set: Postage Mode" and
returns to the Postage Mode Ready Screen.
Only available on the DM300. Select this option when you
want to seal envelopes but you don't want to print postage
on them. This feature turns off postage printing and lets you
use the mailing machine as an envelope sealer.
In the Options Menu. Select Options > Seal Only.
The display prompts: "Mode set: Seal Only Mode" and then
displays the Seal Only Mode Ready Screen.
Select this to bring up a sub-menu of functions which allow
you to clean the print head or test print quality.
In the Options Menu. Select Options > Ink Functions.
Allows you to select one of the following options:
Maintenance
Print Test
Fill Ink Reservoir
If you notice missing lines in the meter stamp, perform
printer maintenance. Printing an incomplete stamp may
waste postage.
In the Ink Functions Menu.
Select: Options > Ink Functions > Maintenance.
Press yes (Enter) to perform maintenance; press no
(Options) to go back to the Ink Functions Menu. If you