Print Position; Lock Code - Pitney Bowes DM225 Operating Manual

Configuration

Print Position

What is it?
Where is it?
Action...

Lock Code

What is it?
Where is it?
Action...
3-14
Allows you to adjust the position of the meter impression
with respect to the right edge of the envelope. You might do
this to compensate for thick envelopes that present a
stepped edge to the print head.
In the Basic Settings Menu.
Select Options > Setup > Basic Settings > Print Position
Press 1 to shift the print position slightly to the left. Press
again to shift it more to the left.
Press 2 to shift the print position slightly to the right.
Press Enter when you're done. The display shows the print
position you selected and returns to the Basic Settings
Menu.
HINT: Test your setting by printing a zero (0.00) meter
stamp on a sample mailpiece. Check print quality and make
sure the imprint is where you want it.
This option allows you to set or change the meter's Lock
Code. The Lock Code prevents unauthorised use of your
meter by requiring a four-digit code (password) to unlock
the meter.
In the Basic Settings Menu.
Select: Options > Setup Menu > Basic Settings > Lock
Code
If a lock code already exists, the meter asks you to key it in.
Type in your current four-digit lock code and press Enter.
Type in the new four-digit lock code. If you don't want to
use the lock feature, type 0000.
Press Enter.
Type the new code again to confirm it and press Enter. The
display shows the status of the lock feature —"Lock Code
Set" or "Lock Feature Disabled" — and returns to the Basic
Settings Menu.