Opening The Lid (Cover) - Emerson Rosemount 708 Reference Manual

Reference Manual
00809-0100-4708
Table 6-1: Maintenance and Troubleshooting Suggestions
Symptom
Configuration troubleshooting
Cannot configure the
device with Field
Communicator or AMS
Device Manager
Wireless troubleshooting
Poor wireless connectivity
Acoustic Transmitter not
joining network
Limited Bandwidth Error
6.4

Opening the lid (cover)

Before opening the lid for maintenance reasons observe following items:
• Do not remove the lid while circuits are live.
• No dust deposits or whirlings are present.
• No rain can enter into the housing.
Rosemount 708 Wireless Acoustic Transmitter Reference Manual
Corrective actions
1. Power cycle the device.
2. Verify/replace power module.
3. Refer to AMS Wireless Configurator and/or handheld
configuration tool manual for further troubleshooting.
1. Verify device oriented for optimal connections.
2. Verify wireless network best practices are followed (See
Recommended Wireless Network Practices
information).
1. Verify the device has power.
2. Verify the device is within effective communications range.
3. Verify the proper Network ID has been entered into the device.
4. See troubleshooting section of the
Reference Manual for more information.
1. Use the slowest acceptable update rate.
2. Increase communication paths by adding more wireless points.
3. Check that the device has been online for at least an hour.
4. Create a new network with an additional Emerson Wireless
Gateway.
Troubleshooting
June 2022
(continued)
for more
Emerson Wireless Gateway
35