Emerson Rosemount 708 Reference Manual page 30

Operation and Maintenance
June 2022
Example
Note
If the input conditions are too close to the high or low measurement device limits, the
install and learn function will not be a good method to set the alert levels. In this case,
check configuration conditions and verify the status is before continuing. If current input
conditions do not allow for the install and learn function, use the
alert setup
Figure 5-4: Install and Learn Alert Setup Screen
Guided user alert setup
Guided user alert setup cycles through on-screen prompts to set the alert levels. At each
screen, the current level will be shown along with a field to enter the desired alert level as
seen in
Procedure
1. To use the guided alert setup, navigate to the configuration menu under guided
2. Follow the on-screen prompts and enter the desired alert levels.
30
The application will go through a series of steps to determine the current input
conditions and set alerts based on this normal operation
to set alerts.
Figure 5-5.
setup and select Alert Setup, then Guided User Alert Setup.
Rosemount 708 Wireless Acoustic Transmitter Reference Manual
Reference Manual
00809-0100-4708
(Figure 5-4).
Manual or Guided user