Transportation, Unpacking, And Checking - Huawei SmartLi 2.0 User Manual

SmartLi 2.0
User Manual
Cable Name
DC power
cable
(Optional)
EPO cable

4.3 Transportation, Unpacking, and Checking

● To prevent the cabinet from falling over, secure it to a pallet truck using ropes
● After placing the cabinet in the installation position, unpack it carefully to
● To prevent dust from settling on the cabinet, leave the original packing
SmartLi Cabinet
Step 1 Use a pallet truck to transport the cabinet to the installation position.
Step 2 Remove the packing case and dust cover. Keep the dust cover, accessories, and
marking-off template aside.
Step 3 Check that the cabinet is intact.
1.
2.
Step 4 After confirming that the cabinet is intact, remove the L-shaped bracket that
secures the cabinet and pallet, and secure the sliding plate to the pallet using the
two M12 screws that you have removed.
Issue 10 (2022-04-30)
Recommended Size
● 120 mm
cabinet ≤ 150 kW;
you are advised to set
I1 of the battery
circuit breaker to
MIN)
● 150 mm
cabinet > 150 kW)
22 AWG
NO TICE
before moving it. To prevent shocks or falls, move the cabinet gently.
avoid scratches. Keep the cabinet steady during unpacking.
materials on the cabinet until installation is required.
Visually inspect the cabinet appearance for damage caused during
transportation. If any damage is founded, report the photos to the carrier
immediately.
Check that all fittings comply with the packing list. If there is any discrepancy,
keep a record and contact the supplier immediately.
Copyright © Huawei Technologies Co., Ltd.
Description
● If multiple cabinets are deployed,
2
(load per
ensure that the length and
specifications of cables for each
cabinet are the same.
● DC power cable length: ≤ 50 m
● Connector type on the SmartLi
2 cabinet side: DT terminals
(load per
crimped on cables; bolt
specifications: M12x30 mm
Prepared by the customer.
4 Installation and Cable Connection
41