Mechanical Safety - Huawei SmartLi 2.0 User Manual

SmartLi 2.0
User Manual
●
●
●
●
●
●
●

1.4 Mechanical Safety

When pulling the equipment out of a cabinet, be aware of unstable or heavy
objects in the cabinet to prevent injury.
General Requirements
●
●
Using Ladders
●
●
●
Issue 10 (2022-04-30)
– Wear personal protective equipment such as the safety helmet and safety
belt or waist rope and fasten it to a solid structure. Do not mount it on
an insecure moveable object or metal object with sharp edges. Make sure
that the hooks will not slide off.
Set a restricted area and prominent signs for working at heights to warn away
irrelevant personnel.
Carry the operation machinery and tools properly to prevent them from
falling off and causing injuries.
Personnel involving working at heights are not allowed to throw objects from
the height to the ground, or vice versa. Objects should be transported by
tough slings, hanging baskets, highline trolleys, or cranes.
Ensure that guard rails and warning signs are set at the edges and openings
of the area involving working at heights to prevent falls.
Do not pile up scaffolding, springboards, or other sundries on the ground
under the area involving working at heights. Do not allow people to stay or
pass under the area involving working at heights.
Inspect the scaffolding, springboards, and workbenches used for working at
heights in advance to ensure that their structures are solid and not
overloaded.
Any violations must be promptly pointed out by the site manager or safety
supervisor and the involved personnel must correct their operations. Personnel
who fail to comply with the requirements must stop the operations.
WARNING
Repaint any scratched surfaces caused during equipment transportation or
installation in a timely manner. Scratched equipment should not be exposed
to an outdoor environment for extended periods.
Before installation, ensure that the equipment is firmly anchored to the floor
or other solid objects, such as a wall or an installation rack.
Use wooden or fiberglass ladders when you need to perform live working at
heights.
When a step ladder is used, ensure that the pull ropes are secured and the
ladder is held firm.
Before using a ladder, check that it is intact and confirm its load bearing
capacity. Do not overload it.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
7