Sealing A Cabinet - Huawei SmartLi 2.0 User Manual

SmartLi 2.0
User Manual

4.10 Sealing a Cabinet

Step 1 Check that cables are correctly routed.
Step 2 Fill in gap between the cables and the cabinet with sealing putty.
Figure 4-68 Filling the hole with sealing putty
(1) Paper protective film
Step 3 After verifying the installation, reinstall all covers.
Step 4 If the lithium battery cabinet is not powered on after installation, reinstall the dust
covers to prevent dust buildup inside the cabinet.
Figure 4-69 Installing the dust covers
(1) Top dust cover
----End
Issue 10 (2022-04-30)
(2) Transparent film
(2) Rear dust cover
Copyright © Huawei Technologies Co., Ltd.
4 Installation and Cable Connection
(3) Sealing putty (with the
transparent film facing
upward)
(3) Front dust cover
86