Huawei SmartLi 2.0 User Manual page 43

SmartLi 2.0
User Manual
Table 3-4 Recharge qualification standard and measurement method
Lithium
Battery
Model
ESM-6440
P1
Step 7 Remove the battery module cables, place the battery module in the original
packing case, and update the latest charge time and next charge time on the
recharge label of the original packing case. The battery module should be used as
soon as possible.
----End
Issue 10 (2022-04-30)
Required Required
Voltage Voltage After
When Staying in
Recharge Open-Circuit
Ends State for 10
Minutes
Following
Recharge
≥ 66.6 V ≥ 64 V
Copyright © Huawei Technologies Co., Ltd.
3 Transportation and Storage Requirements
Method for Measuring Battery
Voltage
● Method 1: Use a voltmeter to
measure the voltage between
the positive and negative
terminals of the battery.
● Method 2: Check the battery
terminal voltage in the test
information displayed on the
portable battery charger/
discharger.
36