Huawei SmartLi 2.0 User Manual page 88

SmartLi 2.0
User Manual
● When installing a copper bar, connect the part with a round hole to the upper
● Excessive bolts will be used as spare parts.
1.
2.
Issue 10 (2022-04-30)
NO TICE
battery module, and connect the part with a slotted hole to the lower battery
module. Install the part with a round hole first, and then the part with a slotted
hole.
Open the terminal protective covers, install copper bars between battery
modules, and close the covers. Install copper bars between other battery
modules in sequence.
Figure 4-62 Installing copper bars between battery modules (using the 8+8
scenario as an example)
Open the terminal protective covers, install copper bars between battery
modules and fuses, and close the terminal protective covers.
Copyright © Huawei Technologies Co., Ltd.
4 Installation and Cable Connection
81