Table of Contents
Advertisement
UPS5000-E-125 kVA
User Manual (Integrated UPS 3.0, 02291136)
3.1.4 Transportation, Unpacking, and Checking
Context
● Only trained personnel are allowed to move the UPS. Use a forklift to transport
● Check whether the UPS is damaged during transportation. If any damage is
● To prevent the UPS from falling over, secure it to a forklift using ropes before
● Move the UPS with caution. Any bumping or falling may damage the UPS.
● Check against the packing list. If some fittings are missing or do not comply
● If the UPS installation environment is in poor condition and the UPS needs to
Procedure
Step 1 Use a forklift to transport the UPS to the installation position.
Step 2 Remove the packaging.
Step 3 After checking that the UPS is intact, remove the L-shaped brackets that secure
the cabinet and the pallet.
Issue 01 (2022-09-26)
NO TICE
the UPS case secured to a wooden pallet to the installation position.
found, notify the carrier immediately.
moving it.
After placing the case in the installation position, unpack it with caution to
prevent scratches. Keep the UPS steady during unpacking.
with the packing list, record the information and contact your supplier or local
office immediately.
be stored for a long time after it is unpacked, take measures to prevent dust. It
is recommended that the UPS be wrapped with the original plastic packing.
Copyright © Huawei Digital Power Technologies Co., Ltd.
3 Installation
55
Advertisement
Table of Contents
