Table of Contents
Advertisement
23_H6_OM_EN_IN_t.book Page 33
DRIVER MEMORY SETTINGS — IF EQUIPPED
This feature allows the driver to store up to two
different memory profiles for easy recall through a
memory switch. Each memory profile saves a
desired driver seat position setting.
NOTE:
Your vehicle is equipped with two key fobs, each
can be linked to either memory position 1 or 2.
The memory settings switch is located on the
driver's door trim panel. The switch consists of
three buttons:
The set (S) button, which is used to activate the
memory save function.
The (1) and (2) buttons which are used to recall
either of two saved memory profiles.
Memory Settings Switch
P
T
M
F
ROGRAMMING
HE
EMORY
To create a new memory profile, perform the
following:
NOTE:
Saving a new memory profile will erase an existing
profile from memory.
1. Place the vehicle's ignition in the ON position.
2. Adjust all memory profile settings to desired
preferences (i.e., seat presets).
GETTING TO KNOW YOUR VEHICLE
3. Push the set (S) button on the memory switch,
and then push the desired memory button
(1 or 2) within five seconds. The instrument
cluster display will display which memory
position is being set.
NOTE:
Memory profiles can be set without the vehicle in
PARK, but the vehicle must be in PARK to recall a
memory profile.
L
A
U
INKING
ND
NLINKING
K
E
K
EYLESS
NTRY
EY
EATURE
Your remote keyless entry key fob can be
programmed to recall one of two saved memory
profiles.
NOTE:
Before programming your key fob you must select
the "Memory Linked To FOB" feature through the
Uconnect Settings Ú page 157.
33
T
R
HE
EMOTE
F
T
M
OB
O
EMORY
Advertisement
Table of Contents
