Jeep H6 Manual page 260

23_H6_OM_EN_IN_t.book Page 260
260 SERVICING AND MAINTENANCE
3. Tilt the lower end of the wiper blade away from
the arm and with one finger push the release
tab toward the wiper arm.
Wiper Disengaging
1 — Locking Tab
2 — Wiper
3 — Release Tab
4. Slide the wiper blade down towards the base
of the wiper arm.
5. With the wiper blade disengaged, remove the
wiper blade from the wiper arm by holding the
wiper arm with one hand and separating the
wiper blade from the wiper arm with the other
hand (move the wiper blade down toward the
base of the wiper arm and away from the J
hook in the end of the wiper arm).
Removing Wiper From Wiper Arm
1 — Wiper
2 — Locking Tab
3 — Wiper Arm J Hook
6. Gently lower the wiper arm onto the glass.
Installing The Front Wipers
1. Lift the wiper arm off of the glass, until the
wiper arm is in the full up position.
2. Position the wiper blade under the hook on the
tip of the wiper arm with the wiper locking tab
open.
3. Insert the receiver bracket on the wiper
assembly into the hook on the tip of the arm
through the opening in the wiper blade under
the locking tab.
4. Slide the wiper blade up into the hook on the
wiper arm until it is latched (engagement will
be accompanied by an audible click). Fold
down the latch release tab and snap it into its
locked position.
5. Gently lower the wiper blade onto the glass.