Customer Programmable Features - Jeep H6 Manual

23_H6_OM_EN_IN_t.book Page 158
158 MULTIMEDIA
Your Uconnect system may also have SCREEN OFF
and MUTE buttons on the faceplate.
Push the SCREEN OFF button on the faceplate to
turn off the Uconnect screen. Push the button
again or tap the screen to turn the screen on.
Press the Back Arrow button on the touchscreen to
exit out of a Menu or certain option on the
Uconnect system.
Push and hold the Power button on the radio
faceplate for a minimum of 15 seconds to reset
the radio.
C P F
USTOMER ROGRAMMABLE EATURES
Uconnect 5 NAV With 10.1-inch Display Buttons On The
Faceplate And Buttons On The Touchscreen
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
Press the Vehicle button, then press the Settings
tab on the top of the touchscreen. In this menu, the
Uconnect system allows you to access all of the
available programmable features.
NOTE:
Only one touchscreen area may be selected at a

time.
Depending on the vehicle's options, feature

settings may vary.
When making a selection, press the button on the
touchscreen to enter the desired menu. Once in
the desired menu, press and release the preferred
setting option until a check mark appears next to
the setting, showing that setting has been
selected. Once the setting is complete, press the
Vehicle button to exit to the screen. Pressing the
Up or Down Arrow button on the right side of the
screen will allow you to toggle up or down through
the available settings.