Jeep H6 Manual page 38

23_H6_OM_EN_IN_t.book Page 38
38 GETTING TO KNOW YOUR VEHICLE
Seat Tumbling Label (Left Side)
Seat Tumbling Label (Right Side)
NOTE:
Stow the rear center lap belt as shown when not in
use to avoid damage to the seat when folding or
tumbling.
Stow Center Lap Belt When Not In Use
WARNING!
Do not drive the vehicle with the second row
seats in the tumbled position. The second row
seats are only intended to be tumbled for entry
and exit to the third row seat. Failure to follow
these instructions could result in personal injury.
To Raise The Rear Seat
Unfold the tumbled seat rearward into the folded
flat position, and lock it into place. Then lift the
seatback, and finally the head restraint, until they
are locked into place.
WARNING!
Be certain that the seatback is securely

locked into position. If the seatback is not
securely locked into position the seat will not
provide the proper stability for child seats
and/or passengers. An improperly latched
seat could cause serious injury.
When the second row seats are tumbled,

occupants of the third row seat must keep
hands and feet clear of the in-floor strikers
when the second row seats are being replaced
to the original positions. Injuries can occur if
hands or feet are in the way of the second row
seat latches.