To Arm The System; To Disarm The System - Jeep H6 Manual

23_H6_OM_EN_IN_t.book Page 25
The Vehicle Security system does not monitor

glass breakage or the movement of objects or
people inside the vehicle. The alarm also does
not activate in the case of vehicle tilt variations
when it is parked.
T A T S
O RM HE YSTEM
Follow these steps to arm the Vehicle Security
system:
1. Make sure the vehicle's ignition is placed in
the OFF position.
For vehicles equipped with Keyless Entry,

make sure the vehicle's keyless ignition
system is OFF.
2. Perform one of the following methods to lock
the vehicle:
Push the lock button on the interior power

door lock switch with the driver and/or
passenger door open.
Push the lock button on the exterior Passive

Entry door handle with a valid key fob avail-
able in the same exterior zone Ú page 27.
Push the lock button on the key fob.

3. If any doors are open, close them.
When the Vehicle Security system is armed, the
Vehicle Security Light (located in the lower left
portion of the instrument cluster display) will begin
to flash every one second until it is disarmed.
NOTE:
If the system is armed by pushing the lock button
on the interior door panel, the Vehicle Security
Light will flash rapidly for about 15 seconds once
the door is closed, then slow down to every one
second.
T D T S
O ISARM HE YSTEM
The Vehicle Security system can be disarmed using
any of the following methods:
Push the unlock button on the key fob.

Grab the Passive Entry door handle to unlock

the door Ú page 27.
Cycle the ignition out of the OFF position to

disarm the system.
GETTING TO KNOW YOUR VEHICLE
NOTE:
The driver's door key cylinder and the liftgate

button on the key fob cannot arm or disarm the
Vehicle Security system.
The Vehicle Security system remains armed

during power liftgate entry. Pushing the liftgate
button will not disarm the Vehicle Security
system. If someone enters the vehicle through
the opened liftgate, then opens any door, the
alarm will sound.
When the Vehicle Security system is armed, the

interior power door lock switches will not unlock
the doors.
The Vehicle Security system is designed to protect
your vehicle. However, you can create conditions
where the system will give you a false alarm. If one
of the previously described arming sequences has
occurred, the Vehicle Security system will arm
regardless of whether you are in the vehicle or not.
If you remain in the vehicle and open a door, the
alarm will sound. If this occurs, disarm the Vehicle
Security system.
25