Table of Contents
Advertisement
23_H6_OM_EN_IN_t.book Page 47
F
M
— I
E
OLDING
IRRORS
F
QUIPPED
The exterior mirrors are hinged to allow the mirror
to pivot forward or rearward to help avoid damage.
The mirror has three detent positions: full forward,
normal and full rearward.
Folding Exterior Mirror
P
A
M
OWER
DJUSTMENT
IRRORS
The power mirror control switch is located on the
driver's side door trim panel.
To adjust a mirror, rotate the control switch to the
mirror you want to adjust (L) or (R). Then push the
switch in the direction that you want the mirror to
move.
Power Mirror Switch
1 — Neutral Position
2 — Left Mirror
3 — Control Switch
4 — Right Mirror
5 — Power Folding Position (If Equipped)
GETTING TO KNOW YOUR VEHICLE
NOTE:
Once adjustment is complete, rotate the knob to
the neutral position to prevent accidental move-
ments.
Power Folding — If Equipped
To fold the door mirrors in using the Power Folding
Mirror function, rotate the control switch to the
power folding position. Rotating the control to the
left, right, or neutral position will return the mirrors
to the driving position.
If the power mirror control switch is moved again
during door mirror folding (from closed to open
position and vice versa), the movement direction is
reversed.
Power mirror position can be saved as part of the
Driver Memory Settings (if equipped) Ú page 33.
A
P
F
UTOMATIC
OWER
OLDING
M
— I
E
IRRORS
F
QUIPPED
When enabled within Uconnect Settings
Ú page 157, the exterior mirrors will automatically
fold when the vehicle's ignition is placed in the OFF
position, and after the doors are locked and
closed.
47
Advertisement
Table of Contents
