Jeep H6 Manual page 280

23_H6_OM_EN_IN_t.book Page 280
280 SERVICING AND MAINTENANCE
Dome Light Vanity Mirror — If Equipped
To replace the bulbs proceed as follows:
1. Lift the cover of the mirror and pull out the
mirror frame with the mirror light cover
attached.
2. Replace the bulb, releasing it from the side
contacts, and then insert the new bulb, making
sure that it is properly locked between the
contacts.
Visor
1 — Visor Mirror Cover
2 — Visor Mirror Light
3. Reinstall the visor mirror light cover making
sure that it is properly locked.
4. Finally lower the visor mirror cover to the
mirror.
Storage Light Glove Compartment
To replace the bulb proceed as follows:
1. Open the glove compartment.
2. Place your fingers inside the light assembly,
pull the bulb to replace it.
Bulb Removal/Installation
3. Insert the new bulb, making sure it is properly
locked.
Cargo Light
To replace the bulbs proceed as follows:
1. Lower the handle in the direction shown;
remove the dome light.
Grab Handle/Dome Light