Driver Memory Settings - If Equipped; Programming The Memory Feature - Jeep CHEROKEE 2020 Owner's Manual

32 GETTING TO KNOW YOUR VEHICLE
DRIVER MEMORY SETTINGS — IF EQUIPPED
Your key fob can be programmed to recall the
same positions when the unlock button is
pushed. This feature allows the driver to store
up to two different memory profiles for easy
recall through a memory switch. Each memory
profile contains desired position settings for the
following features:
Driver seat

Easy Entry/Exit seat (if equipped)

Side mirrors

A set of desired radio station presets

NOTE:
Your vehicle is equipped with two key fobs,

one key fob can be linked to memory position
1 and the other key fob can be linked to
memory position 2.
Be sure to program the radio presets prior to

programming the memory seats.
The memory setting switch is located on the
driver's door trim panel. The switch consists of
three buttons:
The set (S) button, which is used to activate

the memory save function.
The (1) and (2) buttons which are used to

recall either of two pre-programmed memory
profiles.
Driver Memory Switch
P T M
ROGRAMMING HE EMORY
To create a new memory profile, perform the
following:
NOTE:
Saving a new memory profile will erase an
existing profile from memory.
1. Place the vehicle's ignition in the ON/RUN
position.
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror and radio
station presets).
3. Push and release the set (S) button on the
memory switch, then push memory button
(1) within five seconds. The instrument
cluster display will display which memory
position is being set.
If desired, a second memory profile can be
stored into memory as follows:
1. Place the vehicle's ignition in the ON/RUN
position.
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror and radio
station presets).
F
EATURE