Page 1 Compass 2 0 1 1 O W N E R ’ S M A N U A L...
Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and features and equipment that are either standard or op- the name Chrysler Canada Inc.
Page 3: Introduction
TABLE OF CONTENTS SECTION PAGE ............3 INTRODUCTION .
Page 5: Table Of Contents
INTRODUCTION CONTENTS Introduction ......4 Warnings And Cautions ....7 Rollover Warning .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized Congratulations on selecting your new Chrysler Group dealer knows your vehicle best, has factory-trained tech- LLC vehicle. Be assured that it represents precision nicians and genuine MOPAR parts, and cares about workmanship, distinctive styling, and high quality - all your satisfaction.
Page 7: How To Use This Manual
INTRODUCTION 5 control. Failure to operate this vehicle safely may result existing seat belts could cut the highway death toll by in a collision, rollover of the vehicle, and severe or fatal 10,000 or more each year and could reduce disabling injury.
Page 8 6 INTRODUCTION...
Page 9: Warnings And Cautions
INTRODUCTION 7 WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 10: Vehicle Modifications/Alterations
8 INTRODUCTION VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ To Arm The System ....18 A Word About Your Keys ....12 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Sound Horn With Remote Key Lock ..21 Power Windows — If Equipped ... . 33 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Energy Management Feature ... . . 52 ▫ Event Data Recorder (EDR) ....72 ▫...
Page 14: Things To Know Before Starting Your Vehicle
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key Removal The authorized dealer that sold you your new vehicle has 1. Place the shift lever in PARK (if equipped with an the key code numbers for your vehicle locks. These automatic transmission).
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 described. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safety feature is inoperable. The engine can be started and stopped but the key cannot be removed until you obtain service.
Page 16: Locking Doors With A Key
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SENTRY KEY CAUTION! The Sentry Key Immobilizer System prevents unauthor- ized vehicle operation by disabling the engine. The An unlocked car is an invitation to thieves. Always system does not need to be armed or activated. Operation remove the key from the ignition and lock all the is automatic, regardless of whether the vehicle is locked doors when leaving the vehicle unattended.
Page 17: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 seconds for a bulb check. If the light remains on after the All of the keys provided with your new vehicle have bulb check, it indicates that there is a problem with the been programmed to the vehicle electronics.
Page 18: Customer Key Programming
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE dealer or by following the customer key programming three seconds, but no longer than 15 seconds. Then, turn procedure. This procedure consists of programming a the ignition switch to the LOCK position and remove the blank key to the vehicle electronics.
Page 19: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 • This device may not cause harmful interference. The new Sentry Key is programmed. The Remote Keyless Entry (RKE) transmitter will also be pro- • This device must accept any interference that may be grammed during this procedure.
Page 20: To Arm The System
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Arm The System To Disarm The System Press UNLOCK on the RKE transmitter, or insert the key 1. Remove the key from the ignition switch and get out into the ignition switch and turn the ignition switch to of the vehicle.
Page 21: To Unlock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 To Unlock The Doors And Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door, or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal.
Page 22: Illuminated Approach - If Equipped
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the Security Alarm activated will cause the alarm to sound. following steps: Press the UNLOCK button to deactivate the Vehicle Security Alarm. 1. Press and hold the LOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than Illuminated Approach —...
Page 23: To Lock The Doors And Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 To Lock The Doors And Liftgate 1. Press the LOCK button on a programmed RKE trans- Press and release the LOCK button on the RKE transmit- mitter for at least 4 seconds, but no longer than 10 sec- ter to lock all doors and liftgate.
Page 24: Flash Lights With Remote Key Lock/Unlock
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Flash Lights With Remote Key Lock/Unlock 3. Test the feature while outside of the vehicle by press- ing the LOCK/UNLOCK buttons on the RKE transmitter This feature will cause the turn signal lights to flash when with the ignition switch in the LOCK position and the the doors are locked or unlocked with the RKE transmit- key removed.
Page 25: Programming Additional Transmitters
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 The Panic Alarm will stay on for three minutes unless 2. This device must accept any interference that may be you turn it off by pressing the PANIC button a second received including interference that may cause undesired time or if the vehicle speed is 5 mph (8 km/h) or greater.
Page 26: Transmitter Battery Replacement
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Transmitter Battery Replacement NOTE: Perchlorate Material – special handling may apply. www.dtsc.ca.gov/hazardouswaste/ perchlorate The recommended replacement battery is CR2032. 1. If the RKE transmitter is equipped with a screw, remove the screw. With the RKE transmitter buttons facing down, use a flat blade screwdriver to pry the two halves of the RKE transmitter apart.
Page 27: Remote Starting System - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • Hazard switch off NOTE: If the RKE transmitter is equipped with a screw, reinstall and tighten the screw until snug. • Brake switch inactive (brake pedal not pressed) REMOTE STARTING SYSTEM — IF EQUIPPED •...
Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The EVIC message stays active until the ignition is turned WARNING! (Continued) to the ON/RUN position. • Keep Remote Keyless Entry (RKE) transmitters To Enter Remote Start away from children. Operation of the Remote Start Press and release the REMOTE START button System, windows, door locks or other controls on the RKE transmitter twice, within five sec-...
Page 29: To Exit Remote Start And Drive
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 • The engine can be started two consecutive times (two To Exit Remote Start Mode Without Driving The 15-minute cycles) with the RKE transmitter. However, Vehicle the ignition switch must be cycled to the ON/RUN Press and release the REMOTE START button one time, position before you can repeat the start sequence for a or allow the engine to run for the entire 15-minute cycle.
Page 30: Door Locks
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE DOOR LOCKS WARNING! Manual Door Locks • For personal security and safety in the event of an Use the manual door lock knob to lock the doors from accident, lock the vehicle doors as you drive as inside the vehicle.
Page 31: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 Power Door Locks A power door lock switch is located on the driver’s and front passenger’s door panel. Press this switch to lock or unlock the doors and liftgate. NOTE: To prevent from locking the key in the vehicle, the power door lock switch will not operate when the key is in the ignition and either front door is open.
Page 32 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, perform the 2. The transmission is in gear. following procedure: 3. All doors are closed. 1. Close all doors and place the key in the ignition 4.
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 NOTE: Automatic Unlock Doors On Exit Programming • If you do not hear the chime it means that the system The Automatic Unlock Doors On Exit feature can be did not enter the programming mode and you will enabled or disabled as follows: need to repeat the procedure.
Page 34: Child-Protection Door Lock System - Rear Doors
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. A single chime will indicate the completion of the To engage or disengage the Child-Protection Door programming. Lock system 1. Open the rear door. 5. Repeat these steps if you want to return this feature to its previous setting.
Page 35: Power Windows - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 NOTE: For emergency exit with the system engaged, move the lock knob up (unlocked position), roll down the window and open the door with the outside door handle. POWER WINDOWS — IF EQUIPPED Power Window Switches The window controls on the driver’s door trim panel control all the door windows.
Page 36: Understanding Your Instrument Panel
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 min- utes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature.
Page 37: Window Lockout Switch
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 Window Lockout Switch LIFTGATE The window lockout switch on the driver’s door allows NOTE: The key that is used to start the vehicle is also you to disable the window control on the other doors. To used to lock or unlock the doors and open the liftgate.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Once unlocked, the liftgate can be opened or closed NOTE: • In the event of a power malfunction, or the RKE without using the key. To open the liftgate, squeeze the liftgate release and pull the liftgate open with one fluid transmitter is inoperative, insert the key into the motion.
Page 39: Occupant Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 • Supplemental Active Head Restraints (AHR) located WARNING! (Continued) on top of the front seats (integrated into the head • If you are required to drive with the liftgate open, restraint) make sure that all windows are closed, and the •...
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE all the way out and then adjusting the belt to the Here are some simple steps you can take to minimize the desired length to restrain a child seat or secure a large risk of harm from a deploying airbag: item in a seat —...
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 ride properly buckled up in the rear seat. Never allow 4. Do not lean against the door or window. If your children to slide the shoulder belt behind them or under vehicle has side airbags, and deployment occurs, the their arm.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! • Being too close to the steering wheel or instrument In an accident, you and your passengers can suffer panel during Advanced Front Airbag deployment much greater injuries if you are not properly buckled could cause serious injury, including death.
Page 43: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 of ejection and the risk of injury caused by striking the WARNING! inside of the vehicle. Everyone in a motor vehicle should • It is dangerous to ride in a cargo area, inside or be belted at all times.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is along side the pillar near the WARNING! (Continued) back of your seat. Grasp the latch plate and pull out the • Wearing your belt in the wrong place could make belt.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click.” • A belt that is buckled into the wrong buckle will not protect you properly.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your WARNING! (Continued) abdomen. To remove slack in the lap belt portion, pull up • A belt that is worn under your arm is dangerous. on the shoulder belt.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 6. To release the belt, push the red button on the buckle. WARNING! The belt will automatically retract to its stowed position. • A lap belt worn too high can increase the risk of If necessary, slide the latch plate down the webbing to allow the belt to retract fully.
Page 48: Adjustable Upper Shoulder Belt Anchorage
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Adjustable Upper Shoulder Belt Anchorage In the front seat, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Push the anchorage button to release the anchorage, and move it up or down to the position that fits you best.
Page 49: Second Row Center Lap/Shoulder Belt Operating Instructions
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 In the rear seat, move toward the center of the seat to position the belt away from your neck. Second Row Center Lap/Shoulder Belt Operating Instructions The second row center lap/shoulder belt features a three-point seat belt with a mini-latch and buckle, which allows the shoulder belt to detach from the lower anchor when the seat is folded.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Route the shoulder belt to the inside of the right head 5. Sit back in the seat. Slide the regular latch plate up the restraint. webbing as far as necessary to allow the belt to go around your lap.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 7. Position the lap belt across your thighs, below your 8. Position the shoulder belt on your chest so that it is abdomen. To remove slack in the lap belt portion, pull up comfortable and not resting on your neck.
Page 52: Lap/Shoulder Belt Untwisting Procedure
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 10. To disengage the mini-latch from the mini-buckle for 3. Slide the latch plate upward over the folded webbing. storage, insert the regular latch plate into the black The folded webbing must enter the slot at the top of the button on the top of the mini-buckle.
Page 53: Automatic Locking Retractor Mode (Alr) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 • ALR — Automatic Locking Retractor anytime a child safety seat is installed in a seating position that has a belt with this feature. Children If the passenger seating position is equipped with an 12 years old and under should always be properly ALR and is being used for normal usage: restrained in the rear seat.
Page 54: Energy Management Feature
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! • The belt and retractor assembly must be replaced • The belt and retractor assembly must be replaced if the seat belt assembly Automatic Locking Re- if the seat belt assembly Automatic Locking Re- tractor (ALR) feature or any other seat belt func- tractor (ALR) feature or any other seat belt func- tion is not working properly when checked ac-...
Page 55: Supplemental Active Head Restraints (Ahr)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 NOTE: These devices are not a substitute for proper seat How the Active Head Restraints (AHR) Work belt placement by the occupant. The seat belt still must be The Occupant Restraint Controller (ORC) determines worn snugly and positioned properly.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 1. Grasp the deployed AHR from the rear seat. 3. Pull down then rearward towards the rear of the vehicle then down to engage the locking mechanism. Hand Positioning Points On AHR 2.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE AHR In Reset Position 3 — Final Downward Movement To Engage Locking Mecha- nism NOTE: • If you have difficulties or problems resetting the 4. The AHR front soft foam and trim half should lock Active Head Restraints, see an authorized dealer.
Page 59: Enhanced Seat Belt Use Reminder System (Beltalert )
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 Enhanced Seat Belt Use Reminder System The front passenger seat BeltAlert is not active when the (BeltAlert ) front passenger seat is unoccupied. BeltAlert may be BeltAlert is a feature intended to remind the driver and triggered when an animal or heavy object is on the front front passenger (if equipped with front passenger passenger seat or when the seat is folded flat (if...
Page 60: Seat Belt Extender
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Turn the ignition switch to the ON/RUN position and Seat Belt Extender wait for the Seat Belt Reminder Light to turn off. If a seat belt is too short, even when fully extended, and when the adjustable upper shoulder belt anchorage (if 3.
Page 61: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Seat Belts And Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Advanced Front Airbags have a multistage inflator This vehicle may be equipped with Supplemental Seat- design. This allows the airbag to have different rates of Mounted Side Airbags (SAB) to provide enhanced pro- inflation that are based on the severity and type of tection for an occupant during a side impact.
Page 63: Advanced Front Airbag Features
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • Instrument Panel appropriate to the severity and type of collision as determined by the Occupant Restraint Controller (ORC), • Knee Impact Bolster which may receive information from the front impact • Driver Advanced Front Airbag sensors.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Seat-Mounted Side Airbags (SAB) — WARNING! (Continued) If Equipped • Do not put anything on or around the airbag Supplemental Seat-Mounted Side Airbags may provide covers or attempt to open them manually. You may enhanced protection to help protect an occupant during a damage the airbags and you could be injured side impact.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 When the airbag deploys, it opens the seam between the front and side of the seat’s trim cover. Each airbag deploys independently, that is a left side impact deploys the left airbag only and a right-side impact deploys only the right airbag.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Being too close to the Supplemental Side Airbag WARNING! (Continued) Inflatable Curtain and/or Seat-Mounted Side Airbag • Do not use accessory seat covers or place objects during deployment could cause you to be severely between you and the side airbags;...
Page 67: Airbag Deployment Sensors And Controls
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Along with seat belts and pretensioners, Advanced Front Advanced Front Airbags are designed to provide addi- Airbags work with the knee bolsters to provide improved tional protection by supplementing the seat belts in protection for the driver and front passenger.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Because airbag sensors measure vehicle deceleration over Also, the ORC turns on the Airbag Warning time, vehicle speed and damage by themselves are not Light in the instrument panel for approxi- good indicators of whether or not an airbag should have mately four to eight seconds for a self-check deployed.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 based on the collision type and severity. The steering WARNING! wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the Ignoring the Airbag Warning Light in your instru- airbags inflate to their full size.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Based on the severity and type of collision, the side A quantity of non-toxic gas is generated to inflate the side airbag inflator on the crash side of the vehicle may be curtain airbag.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 • Unlock the doors automatically. Front And Side Impact Sensors In front and side impacts, impact sensors can aid the If A Deployment Occurs ORC in determining appropriate response to impact The front airbags are designed to deflate immediately events.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE However, if you haven’t healed significantly within a WARNING! few days, or if you have any blistering, see your doctor immediately. Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, •...
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Maintaining Your Airbag System WARNING! (Continued) • Do not attempt to modify any part of your airbag WARNING! system. The airbag may inflate accidentally or may • Modifications to any part of the airbag system not function properly if modifications are made.
Page 74: Event Data Recorder (Edr)
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE with airbag system electrical components. While the located on the inside of the fuse block cover for the airbag system is designed to be maintenance free, if any proper airbag fuses. See your authorized dealer if the of the following occurs, have an authorized dealer ser- fuse is good.
Page 75: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 • How far (if at all) the driver was depressing the such as law enforcement, that have the special equip- accelerator and/or brake pedal; and, ment, can read the information if they have access to the vehicle or the EDR.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Safety experts recommend that children ride WARNING! rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types In a collision, an unrestrained child, even a tiny baby, of child restraints can be used rearward-facing infant can become a projectile inside the vehicle.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 • The belt-positioning booster seat is for children weigh- WARNING! ing more than 40 lbs (18 kg), but who are still too small to fit the vehicle’s seat belts properly. If the child Rearward-facing child seats must never be used in cannot sit with knees bent over the vehicle’s cushion the front seat of a vehicle with a front passenger...
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The restraint must be appropriate for your child’s WARNING! weight and height. Check the label on the restraint for • Improper installation can lead to failure of an weight and height limits. infant or child restraint.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 2. Finally, pull on any excess webbing to tighten the lap Driver Center Passenger portion around the child restraint. Any seat belt system CRS Lock CRS Lock CRS Lock will loosen with time, so check the belt occasionally, and First Row pull it tight if necessary.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Buckle the child into the seat according to the child • Check belt fit periodically. A child’s squirming or restraint manufacturer’s directions. slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the WARNING! child closer to the center of the vehicle.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 seats such that two seats share a common lower anchor- age. If you are installing LATCH-compatible child re- straints in adjacent rear seating positions, you can use the LATCH anchors or the vehicle’s seat belt for the outboard position, but you must use the vehicle’s seat belt at the center position.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE provide add-on tether strap kits for some of their older restraint installation, instead of tucking the seat belt products. Tether anchorage kits are also available for behind the child restraint, route the seat belt through the most older vehicles.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 In general, you will first loosen the adjusters on the lower and tether straps so that you can attach the hook or connector to the lower and tether anchorages more easily. The tether strap should be routed over the center of the head restraint and attached to the tether anchor on the rear of the seatback.
Page 84: Engine Break-In Recommendations
82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Drive moderately during the first 300 miles (500 km). WARNING! After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. An incorrectly anchored tether strap could lead to increased head motion and possible injury to the While cruising, brief full-throttle acceleration within the child.
Page 85: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 A new engine may consume some oil during its first few WARNING! (Continued) thousand miles (kilometers) of operation. This should be • Do not allow people to ride in any area of your considered a normal part of the break-in and not inter- vehicle that is not equipped with seats and seat preted as an indication of difficulty.
Page 86: Exhaust Gas
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas If you are required to drive with the trunk/liftgate open, make sure that all windows are closed and the climate WARNING! control BLOWER switch is set at high speed. DO NOT use the recirculation mode.
Page 87: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Safety Checks You Should Make Inside The Defroster Vehicle Check operation by selecting the defrost mode and place the blower control on high speed. You should be able to Seat Belts feel the air directed against the windshield. See your Inspect the belt system periodically, checking for cuts, authorized dealer for service if your defroster is frays, and loose parts.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Al- Pedals that cannot move freely can cause loss of ways properly reinstall and secure floor mats that vehicle control and increase the risk of serious per- have been removed for cleaning.
Page 89: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Periodic Safety Checks You Should Make Outside Door Latches The Vehicle Check for positive closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 91: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......93 Uconnect™ Phone — If Equipped ... 97 ▫...
Page 92 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Voice Command System Operation ..128 ▫ Folding Rear Seat ....144 ▫...
Page 93 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 ▫ Map/Reading Lights ....152 ▫ To Accelerate For Passing ....159 Windshield Wipers And Washers .
Page 94 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Closing Sunroof — Express ... . . 167 ▫ Door Storage ..... . . 176 ▫...
Page 95: Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of vehicle).
Page 96: Outside Mirror - Driver Side
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE to the left of the button will illuminate to indicate when CAUTION! the dimming feature is activated. The sensor to the right of the button does not illuminate. To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror.
Page 97: Power Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Power Mirrors WARNING! The power mirror controls are located on the driver’s door trim panel. Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object.
Page 98: Heated Mirrors - If Equipped
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To adjust a mirror, turn the control wand toward the left WARNING! or right mirror positions indicated. Tilt the control wand in the direction you want the mirror to move. Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are.
Page 99: Vanity Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Vanity Mirrors — If Equipped Uconnect™ Phone — IF EQUIPPED To use the vanity mirror, rotate the sun visor down and Uconnect™ Phone is a voice-activated, hands-free, in- swing the mirror cover upward. vehicle communications system.
Page 100 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • www.jeep.com/uconnect system. Only one linked (or paired) mobile phone can be used with the system at a time. The system is available in • or call 1–877–855–8400 English, Spanish, or French languages.
Page 101: Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Voice Command Button Operation Actual button location may vary with the ra- Voice commands can be used to operate the Uconnect™ dio. The individual buttons are described in the Phone and to navigate through the Uconnect™ Phone “Operation”...
Page 102 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For each feature explanation in this section, only the To activate the Uconnect™ Phone from idle, simply press compound form of the voice command is given. You button and follow the audible prompts for can also break the commands into parts and say each directions.
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • You will then be asked to give your mobile phone a The following are general phone to Uconnect™ Phone pairing instructions: priority level between one and seven, with one being the highest priority. You can pair up to seven mobile •...
Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The system will prompt you to say the number you or downloaded phonebook. To learn how to store a want to call. name in the phonebook, refer to “Add Names to Your Uconnect™...
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • When prompted, enter the number designation (e.g., Phonebook Download – Automatic Phonebook “Home”, “Work”, “Mobile”, or “Other”). This will Transfer From Mobile Phone allow you to store multiple numbers for each phone- If equipped and specifically supported by your phone, book entry, if desired.
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- Phonebook Download — Single Entry loaded, there may be a short delay before the latest If equipped and supported by your phone, Uconnect™ downloaded names can be used. Until then, if avail- Phone also allows the user to download entries one at a able, the previously downloaded phonebook is avail- time from their phone via Bluetooth .
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 • You will then be asked for the name of the phonebook first disconnect or drop the Bluetooth connection to the Uconnect™ Phone, and then send the address entry that you wish to edit. book entry via Bluetooth .
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the name, the Uconnect™ Phone will Delete Uconnect™ Phonebook Entry ask you which designation you wish to delete: home, NOTE: Editing phonebook entries is recommended work, mobile, other, or all. Say the designation you when the vehicle is not in motion.
Page 109: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 • Note that only the phonebook in the current language • The Uconnect™ Phone will then prompt you as to the is deleted. number designation you wish to call. • Automatic downloaded phonebook entries cannot be •...
Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE call, press and hold the button until you hear a by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is single beep, indicating that the incoming call was in progress.
Page 111 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Conference Call Call Termination When two calls are in progress (one active and one on To end a call in progress, momentarily press the hold), press and hold the button until you hear a button.
Page 112: Uconnect™ Phone Features
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Continuation Uconnect™ Phone Features Call continuation is the progression of a phone call on the Language Selection Uconnect™ Phone after the vehicle ignition key has been To change the language that the Uconnect™ Phone is switched to OFF.
Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Emergency Assistance Canada and 060 for Mexico). The number dialed may If you are in an emergency and the mobile phone is not be applicable with the available mobile service and reachable: area. •...
Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Towing Assistance Paging If you need towing assistance: To learn how to page, refer to “Working with Automated Systems”. Paging works properly except for pagers of • Press the button to begin. certain companies, which time out a little too soon to •...
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 When calling a number with your Uconnect™ Phone that The Uconnect™ Phone will then send the corresponding normally requires you to enter in a touch-tone sequence phone number associated with the phonebook entry, as on your mobile phone keypad, you can press the tones over the phone.
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning Confirmation Prompts ON/OFF Dialing Using The Mobile Phone Keypad Turning confirmation prompts off will stop the system You can dial a phone number with your mobile phone from confirming your choices (e.g., the Uconnect™ keypad and still use the Uconnect™...
Page 117: Advanced Phone Connectivity
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Mute/Un-Mute (Mute OFF) from your Uconnect™ Phone paired mobile phone to the When you mute the Uconnect™ Phone, you will still be Uconnect™ Phone or vice versa, press the button able to hear the conversation coming from the other and say “Transfer Call”.
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say “List Phones”. • The selected phone will be used for the next phone call. If the selected phone is not available, the • The Uconnect™ Phone will play the phone names of Uconnect™...
Page 119: Things You Should Know About Your Uconnect™ Phone
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Things You Should Know About Your Uconnect™ You can either press the Uconnect™ Phone button to Phone restore the factory setting or repeat the words and phrases when prompted by the Uconnect™ Phone. For Uconnect™...
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, Voice Command • For best performance, adjust the rearview mirror to • dry weather condition. provide at least ⁄ in (1 cm) gap between the overhead • Even though the system is designed for users speaking console (if equipped) and the mirror.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 • Numbers must be spoken in single digits. “800” must • fully closed windows, be spoken “eight-zero-zero” not “eight hundred”. • dry weather conditions, and • You can say “O” (letter “O”) for “0” (zero). •...
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages: Uconnect™ Phone can read or send new messages on You can send messages using Uconnect™ Phone. To send your phone. a new message: • Press the Read Messages: button. If you receive a new text message while your phone is •...
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 List of Preset Messages: 13. I’ll be late 1. Yes 14. Are you there yet? 2. No 15. Where are we meeting? 3. Where are you? 16. Can this wait? 4. I need more direction. 17.
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn SMS Incoming Announcement ON/OFF Bluetooth Communication Link Turning the SMS Incoming Announcement OFF will stop Mobile phones have been found to lose connection to the the system from announcing the new incoming mes- Uconnect™...
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123...
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125...
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 130: General Information
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information NOTE: Take care to speak into the Voice Interface This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a...
Page 131: Commands
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 NOTE: If you do not say a command within a few When using this system, you should speak clearly and at seconds, the system will present you with a list of a normal speaking volume. options.
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Memo” (to switch to the memo recorder) Changing the Volume • “System Setup” (to switch to system setup) 1. Start a dialogue by pressing the Voice Command button. Radio AM (or Radio Long Wave or Radio Medium Wave —...
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • “Next Station” (to select the next station) • “Menu Radio” (to switch to the radio menu) • “Previous Station” (to select the previous station) • “Main Menu” (to switch to the main menu) •...
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “New Memo” (to record a new memo) — During the • “Delete All” (to delete all memos) recording, you may press the Voice Command Setup button to stop recording. You proceed by saying one of To switch to system setup, you may say on of the the following commands: following:...
Page 135: Voice Training
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • “Voice Training” switched off. This procedure may be repeated with a new user. The system will adapt to the last trained voice only. NOTE: Keep in mind that you have to press the Voice Command button first and wait for the beep SEATS...
Page 136: Power Seats - If Equipped
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Seats — If Equipped WARNING! Some models may be equipped with a power driver’s • Adjusting a seat while driving may be dangerous. seat. The power seat switch is located on the outboard side of the seat near the floor.
Page 137: Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Adjusting The Seat Forward Or Rearward Heated Seats — If Equipped The seat can be adjusted both forward and rearward. On some models, the front driver and passenger seats Push the seat switch forward or rearward, the seat will may be equipped with heaters in both the seat cushions move in the direction of the switch.
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 45 minutes of continuous operation. If LOW-level heating WARNING! (Continued) is selected, the system automatically turns the heater and • Do not place anything on the seat that insulates the indicator light OFF after a maximum of 45 minutes of against heat, such as a blanket or cushion.
Page 139: Manual Front Seat Adjustment
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Manual Front Seat Adjustment On models equipped with manual seats, the adjusting bar is located at the front of the seats, near the floor. While sitting in the seat, lift up on the bar and move the seat forward or rearward.
Page 140: Manual Seat Height Adjustment - If Equipped
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seatbelts and while the vehicle is parked.
Page 141: Driver's Seatback Recline
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Lumbar Adjustment Lever Reclining Seat Lever Driver’s Seatback Recline WARNING! To adjust the seatback, lift the lever located on the outboard side of the seat, lean back to the desired angle Do not ride with the seatback reclined so that the and release the lever.
Page 142: Fold-Flat Front Passenger Seat
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold-Flat Front Passenger Seat To fold the front passenger seat, lift the recliner handle to the full upward position and push the seatback forward until it rests on the seat cushion. Front Passenger Seat Folded Flat Fold-Flat Front Passenger Seat Lever...
Page 143: Head Restraints
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Head Restraints Active Head Restraints — Front Seats Head restraints are designed to reduce the risk of injury Active Head Restraints are passive, deployable compo- by restricting head movement in the event of a rear nents, and vehicles with this equipment can not be impact.
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To raise the head restraint, pull upward on the head For comfort the Active Head Restraints can be tilted restraint. To lower the head restraint, press the push forward and backward. To tilt the head restraint closer to button, located at the base of the head restraint, and push the back of your head, pull forward on the bottom of the downward on the head restraint.
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 • In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things To Know Before Starting Your Vehicle” for further information. WARNING! • Do not place items over the top of the Active Head Restraint, such as coats, seat covers or portable DVD players.
Page 146: Folding Rear Seat
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat WARNING! (Continued) To provide additional storage area, each rear seatback can • Active Head Restraints may be deployed if they be folded forward. Pull the strap forward to move the are struck by an object such as a hand, foot or loose seat forward and flat.
Page 147: Reclining Rear Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 WARNING! Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
Page 148: To Open And Close The Hood
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only with the vehicle is parked.
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 CAUTION! To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approxi- mately 8 in (20 cm) and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged.
Page 150: Lights
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE LIGHTS Headlights And Parking Lights Turn the end of the multifunction lever to the first detent Multifunction Lever to turn on the parking lights. The multifunction lever controls the operation of the Turn the end of the lever to the second detent to turn on headlights, parking lights, turn signals, headlight beam the headlights.
Page 151: Daytime Running Lights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Daytime Running Lights — If Equipped The high beam lights will come on as Daytime Running Lights (lower intensity), whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is off, the turn signal is off, and the shift lever is in any position except PARK.
Page 152: Turn Signals
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals light bulb. If an indicator fails to light when the lever is Move the multifunction lever up or down and the arrows moved, it would suggest that the indicator bulb is on each side of the instrument cluster flash to show defective.
Page 153: Instrument Panel Dimming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Instrument Panel Dimming Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the park- ing lights or headlights are on.
Page 154: Map/Reading Lights
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Map/Reading Lights NOTE: The lights will remain on until the switch is These lights are mounted between the sun visors above pressed a second time, so be sure they have been turned the rear view mirror. Each light is turned on by pressing off before leaving the vehicle.
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 CAUTION! • Turn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than off. •...
Page 156: Windshield Wiper Operation
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Wiper Operation Intermittent Wiper System Rotate the end of the lever upward to the second detent past Use the intermittent wiper when weather conditions the intermittent settings for low-speed wiper operation. make a single wiping cycle, with a variable pause be- tween cycles, desirable.
Page 157: Windshield Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Windshield Washers Mist Feature To use the washer, pull the control lever toward you and Push down on the control lever to activate a single wipe hold while spray is desired. If the lever is pulled while in to clear the windshield of road mist or spray from a the delay range, the wiper will operate in low-speed passing vehicle.
Page 158: Tilt Steering Column
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Push down on the lever to unlock the steering column. CAUTION! With one hand firmly on the steering wheel, move the steering column up or down, as desired. Push the lever In cold weather, always turn off the wiper switch and up to lock the steering column firmly in place.
Page 159: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle.
Page 160: To Activate
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE System can be reactivated by pushing the Electronic To Set A Desired Speed Speed Control ON/OFF button and resetting the desired Turn the Electronic Speed Control ON. When the vehicle vehicle set speed. has reached the desired speed, press the SET (-) button and release.
Page 161: To Resume Speed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 To Resume Speed decrease until the button is released. Release the button To resume a previously set speed, push the RES (+) when the desired speed is reached, and the new set speed button and release.
Page 162: Garage Door Opener - If Equipped
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On steep hills, a greater speed loss or gain may occur so The HomeLink buttons that are located in the headliner it may be preferable to drive without Electronic Speed or sun visor designate the three different HomeLink Control.
Page 163: Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Programming HomeLink WARNING! Before You Begin • Your motorized door or gate will open and close If you have not trained any of the HomeLink buttons, while you are training the Universal Transceiver. erase all channels before you begin training.
Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After training a HomeLink channel, if the garage Place the handheld transmitter 1–3 in (3-8 cm) away from the HomeLink button you wish to program door does not operate with HomeLink and the ga- while keeping the indicator light in view.
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 This can usually be found where the hanging antenna 1. Firmly press and release the LEARN or TRAINING wire is attached to the garage door opener motor (it is button. The name and color of the button may vary by NOT the button normally used to open and close the manufacturer.
Page 166: Gate Operator/Canadian Programming
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Gate Operator/Canadian Programming successfully accepted the frequency signal. The indica- Canadian radio-frequency laws require transmitter sig- tor light will flash slowly and then rapidly when fully nals to “time-out” (or quit) after several seconds of trained.
Page 167: Reprogramming A Single Homelink Button
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Reprogramming A Single HomeLink Button The HomeLink Universal Transceiver is disabled when To reprogram a channel that has been previously trained, the Vehicle Security Alarm is active. follow these steps: Troubleshooting Tips 1. Turn the ignition switch to the ON/RUN position. If you are having trouble programming HomeLink , here are some of the most common solutions: 2.
Page 168: General Information
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located in the reading light. Canada RSS-210. Operation is subject to the following two conditions: 1.
Page 169: Opening Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 Opening Sunroof — Express WARNING! Press the switch rearward and release it within one-half • Never leave children in a vehicle with the key in second and the sunroof will open automatically from any position.
Page 170: Closing Sunroof - Manual Mode
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE position. The sunroof will close fully and stop automati- NOTE: Pinch protection is disabled while the switch is cally. This is called “Express Close”. During Express pressed. Close operation, any movement of the switch will stop Venting Sunroof —...
Page 171: Wind Buffeting
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Wind Buffeting Ignition Off Operation Wind buffeting can be described as the perception of For vehicles not equipped with the Electronic Vehicle pressure on the ears or a helicopter-type sound in the Information Center (EVIC), the power sunroof switch ears.
Page 172: Electrical Power Outlets
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL POWER OUTLETS Power is available when the ignition switch is in the ON There is a standard 12 Volt (13 Amp) power outlet located or ACC position. Insert the cigar lighter or accessory plug in the instrument panel for added convenience.
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 WARNING! (Continued) • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! •...
Page 174: Power Inverter - If Equipped
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED CAUTION! (Continued) A 115 Volt (150 Watt) AC power inverter is located on the • Accessories that draw higher power (i.e., coolers, front of the center console for added convenience. This vacuum cleaners, lights, etc.) will degrade the outlet can power cellular phones, electronics and other battery even more quickly.
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 WARNING! To avoid serious injury or death: • Do not use a three-prong adaptor. • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. •...
Page 176: Cupholders
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS CAUTION! Your vehicle is equipped with four cupholders. There are • Many accessories that can be plugged in draw two illuminated cupholders located in the front. power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.).
Page 177: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 There are two cupholders located in the back for the rear STORAGE passengers. Glove Compartment And Storage Bin Located on the passenger side of the instrument panel are an upper storage bin and a lower glove compartment. Rear Cupholders 1 —...
Page 178: Door Storage
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the lower glove compartment, pull outward on Door Storage the release handle. The interior door panels are equipped with lower storage areas. Glove Compartment Front Door Storage...
Page 179: Console Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 CONSOLE FEATURES The floor console contains both an upper and lower storage compartment. To open the upper storage compartment, push inward on the upper handle to unlatch the upper lid and lift the lid open.
Page 180: Cargo Area Features
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the lower storage compartment, lift upward on WARNING! the lower handle to unlatch the lower storage compart- ment and lift the lid open. Do not operate this vehicle with a console compart- ment lid in the open position.
Page 181: Cargo Cover
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Press in on the flashlight to release it. Three-Press Switch Cargo Cover Press And Release The cargo area trim panels include two notches for To operate the flashlight, press the switch once for high, mounting the available tonneau cover that accommo- twice for low, and a third time to return to off.
Page 182 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To install the Cargo Cover, insert either end of the cover Using the handle, pull the cover toward you and guide into one of the two notches located in the rear trim the rear cover posts into the guides located on both sides panels.
Page 183: Removable Load Floor
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Removable Load Floor WARNING! The cargo area load floor is removable and can be washed with mild soap and water. In a collision a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle.
Page 184: Cargo Tie-Down Loops
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Tie-Down Loops WARNING! There are four D-rings installed in the cargo area for • Cargo tie-down loops are not safe anchors for a securing cargo. child seat tether strap. In a sudden stop or collision a loop could pull loose and allow the child seat to come loose.
Page 185: Fold Down Speakers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Fold Down Speakers — If Equipped WARNING! (Continued) When the liftgate is open, the speakers can swing down • Place as much cargo as possible in front of the rear off the trim panel to face rearward, for tailgating and axle.
Page 186: Rear Window Features
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR WINDOW FEATURES Rotate the center portion of the lever upward to the first detent position for rear wiper operation. Rear Window Wiper/Washer The rear wiper/washer is controlled by a rotary switch NOTE: The rear wiper operates in an intermittent mode located on the center portion of the control lever.
Page 187: Rear Window Defroster
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Rear Window Defroster CAUTION! (Continued) The rear window defroster button is located on the • Use care when washing the inside of the rear bottom right-side of the blower control knob. window. Do not use abrasive window cleaners on Press this button to turn on the rear window defroster the interior surface of the window.
Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Crossbars should always be used whenever cargo is CAUTION! placed on the roof rack. Load should always be secured • To prevent damage to the roof of your vehicle, DO to cross bars first, with tie down loops used as additional securing points if needed.
Page 189 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 CAUTION! (Continued) WARNING! • Travel at reduced speeds and turn corners care- Cargo must be securely tied down before driving fully when carrying large or heavy loads on the your vehicle. Improperly secured loads can fly off the roof rack.
Page 191: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Engine Oil Change Indicator System — Instrument Panel Features ....192 If Equipped ......215 Instrument Cluster .
Page 192 190 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operating Instructions (Voice Command Media Center 230 (REQ) — AM/FM Stereo Radio And 6–Disc CD/DVD Changer System) — If Equipped ....242 (MP3/WMA AUX Jack) .
Page 193 UNDERSTANDING YOUR INSTRUMENT PANEL 191 ▫ Notes On Playing MP3 Files ... . 259 ▫ Bluetooth Streaming Audio (BTSA) ..273 ▫ List Button (CD Mode For MP3 Play) ..262 Steering Wheel Audio Controls .
Page 194: Instrument Panel Features
192 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Outlet 5 — Storage Bin 9 — Heated Seat Switch – If Equipped 2 — Demisters 6 — Glove Compartment 10 — Hazard Warning Flasher 3 — Instrument Cluster 7 —...
Page 195: Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 193 INSTRUMENT CLUSTER...
Page 196: Instrument Cluster Descriptions
194 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS If jump starting is required, refer to “Jump Starting Procedures” in “What To Do In Emergencies”. 1. Fuel Gauge / Fuel Door Reminder When the ignition switch is in the ON/RUN 3. Electronic Throttle Control (ETC) Light position, the pointer will show the level of fuel This light informs you of a problem with the remaining in the fuel tank.
Page 197 UNDERSTANDING YOUR INSTRUMENT PANEL 195 on briefly as a bulb check. If the light does not come on 6. Speedometer during starting, have the system checked by an autho- The Speedometer shows the vehicle speed in miles per rized dealer. hour and/or kilometers per hour (mph/kph).
Page 198 196 UNDERSTANDING YOUR INSTRUMENT PANEL If the vehicle is driven more than 1 mile (1.6 km) with the conventional brake system will continue to operate either turn signal on, a continuous chime will sound to normally if the BRAKE warning light is not on. alert you to turn the signals off.
Page 199 UNDERSTANDING YOUR INSTRUMENT PANEL 197 12. Tachometer normal, turn the engine off immediately and call for The white area of the scale shows the permissible engine service. Refer to “If Your Engine Overheats” in “What To revolutions-per-minute (RPM x 1000) for each gear range. Do In Emergencies”...
Page 200 198 UNDERSTANDING YOUR INSTRUMENT PANEL booster, the ABS pump will run when applying the brake WARNING! and a brake pedal pulsation may be felt during each stop. Driving a vehicle with the red brake light on is The dual brake system provides a reserve braking capac- dangerous.
Page 201 UNDERSTANDING YOUR INSTRUMENT PANEL 199 The light also will turn on when the parking brake is If the overheating continues, it may become necessary to applied with the ignition switch in the ON/RUN posi- stop the vehicle and run the engine at idle with the tion.
Page 202 200 UNDERSTANDING YOUR INSTRUMENT PANEL 16. Vehicle Security Light — If Equipped CAUTION! This light will flash at a fast rate for approxi- mately 16 seconds, when the vehicle security Driving with a hot engine cooling system could alarm is arming, and then will flash slowly damage your vehicle.
Page 203 UNDERSTANDING YOUR INSTRUMENT PANEL 201 20. Shift Lever Indicator WARNING! The Shift Lever Indicator is self-contained within the instrument cluster. It displays the gear position of the A hot engine cooling system is dangerous. You or automatic transmission. others could be badly burned by steam or boiling coolant.
Page 204 202 UNDERSTANDING YOUR INSTRUMENT PANEL placard or tire inflation pressure label. (If your vehicle maintain correct tire pressure, even if under-inflation has has tires of a different size than the size indicated on the not reached the level to trigger illumination of the TPMS vehicle placard or tire inflation pressure label, you should low tire pressure telltale.
Page 205 UNDERSTANDING YOUR INSTRUMENT PANEL 203 tires or wheels on your vehicle, to ensure that the 23. Odometer / Trip Odometer Display Area replacement or alternate tires and wheels allow the TPMS This display indicates the total distance the vehicle has to continue to function properly.
Page 206 204 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicle Odometer Messages “gASCAP” message will display in the odometer display When the appropriate conditions exist, the following area. Tighten the fuel filler cap properly and press the odometer messages will display: TRIP ODOMETER button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started.
Page 207 UNDERSTANDING YOUR INSTRUMENT PANEL 205 dependent upon your personal driving style. Unless 24. Malfunction Indicator Light (MIL) reset, this message will continue to display each time you The Malfunction Indicator Light (MIL) is part of turn the ignition switch to the ON/RUN position. To turn an Onboard Diagnostic system called OBD II that off the message temporarily, press and release the Trip monitors emissions, engine, and automatic trans-...
Page 208 206 UNDERSTANDING YOUR INSTRUMENT PANEL 25. Front Fog Light Indicator — If Equipped CAUTION! This indicator will illuminate when the front fog lights are on. Prolonged driving with the MIL on could cause damage to the engine control system. It also could 26.
Page 209 UNDERSTANDING YOUR INSTRUMENT PANEL 207 cycles, and the vehicle has been driven several miles 28. 4WD! Warning Light — If Equipped (kilometers) at speeds greater than 30 mph (48 km/h), see This light monitors the 4-Wheel Drive (4WD) your authorized dealer as soon as possible to have the system.
Page 210: Compass Mini-Trip Computer (Cmtc) - If Equipped
208 UNDERSTANDING YOUR INSTRUMENT PANEL 30. Hill Descent Indicator — If Equipped The Compass Mini-Trip Computer is located in the The symbol illuminates (is armed) when the instrument cluster and features a driver-interactive dis- 4WD Lock switch is activated and the trans- play (displays information on outside temperature, com- mission range indicator is in LOW or REVERSE pass direction, and trip information).
Page 211: Control Buttons
UNDERSTANDING YOUR INSTRUMENT PANEL 209 Control Buttons RESET Button To reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button located on the steering wheel. The following displays can be reset or changed: •...
Page 212: Compass/Temperature Display
210 UNDERSTANDING YOUR INSTRUMENT PANEL • Magnetic materials should be kept away from the top Compass/Temperature Display of the center of the instrument panel. This is where the If the vehicle is equipped with a Chrysler NOTE: compass sensor is located. Uconnect™...
Page 213 UNDERSTANDING YOUR INSTRUMENT PANEL 211 seconds) until the current variance zone number is dis- 1. Start the engine and leave the transmission in the played. To change the zone, press and release the STEP PARK position. button to increase the variance one step. Repeat as 2.
Page 214: Electronic Vehicle Information Center (Evic) - If Equipped
212 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER The EVIC consists of the following: (EVIC) — IF EQUIPPED • System status The Electronic Vehicle Information Center (EVIC) fea- • Vehicle information warning message displays tures a driver-interactive display that is located in the instrument cluster.
Page 215 UNDERSTANDING YOUR INSTRUMENT PANEL 213 The system allows the driver to select information by MENU Button pressing the following buttons mounted on the steering Press and release the MENU button to scroll wheel: through the main menus (Fuel Economy, Warn- ings, Timer, Units, System, Personal Settings) or to exit sub menus.
Page 216 214 UNDERSTANDING YOUR INSTRUMENT PANEL • Personal Settings Not Available – Vehicle not in PARK DOWN Button Press and release the DOWN button to scroll (automatic transmission) or vehicle is in motion downward through the sub menus. (manual transmission). • Left/Right Front Door Ajar (one or more, with a single chime if speed is above 1 mph/1 km/h) When the appropriate conditions exist, the EVIC displays •...
Page 217: Engine Oil Change Indicator System - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 215 Engine Oil Change Indicator System — If 1. Turn the ignition switch to the ON position. Do not Equipped start the engine. Oil Change Required 2. Fully depress the accelerator pedal, slowly, three times Your vehicle is equipped with an engine oil change within 10 seconds.
Page 218: Compass/Temperature/Audio
216 UNDERSTANDING YOUR INSTRUMENT PANEL To Reset The Display Average Fuel Economy Pressing and holding the SELECT button once will clear Shows the average fuel economy since the last reset. the function currently being displayed. Reset will only When the fuel economy is reset, the display will read occur if a resettable function is currently being displayed.
Page 219: Tire Pressure Monitor (Tpm)
UNDERSTANDING YOUR INSTRUMENT PANEL 217 When the DTE value is less than 30 miles (48 km) Personal Settings (Customer-Programmable estimated driving distance, the DTE display will change Features) to a text display of LOW FUEL . This display will This allows the driver to set and recall features when the continue until the vehicle runs out of fuel.
Page 220 218 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Uconnect™ language will not change using the RKE Unlock Driver’s Door 1st EVIC. Please refer to “Language Selection” in Uconnect™ When Driver’s Door 1st is selected only the driver’s door Phone — If Equipped for details. will unlock on the first press of the Remote Keyless Entry (RKE) transmitter UNLOCK button and require a second Auto Lock Doors at 15 mph (24 km/h)
Page 221 UNDERSTANDING YOUR INSTRUMENT PANEL 219 Sound Horn with Lock either front vehicle door will cancel this feature. Press When ON is selected, a short horn sound will occur when and hold the SELECT button when in this display until the RKE transmitter LOCK button is pressed. This feature “OFF”, “45 sec.”, “5 min.”, or “10 min.”...
Page 222 220 UNDERSTANDING YOUR INSTRUMENT PANEL Display Units In metallic objects) until the “CAL” message displayed in The EVIC, odometer, and Uconnect™ gps system units the EVIC turns off. The compass will now function can be changed between English and Metric. normally.
Page 223 UNDERSTANDING YOUR INSTRUMENT PANEL 221 3. Press the DOWN button until “Calibrate Compass” NOTE: Magnetic materials should be kept away from displays in the EVIC. the top of the right rear quarter window. This is where the compass sensor is located. 4.
Page 224: Media Center 230 (Req) - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)
222 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press the DOWN button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4. Press and release SELECT button until the proper variance zone is selected according to the map. 5.
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL 223 Power Switch/Volume Control (Rotary) SCAN Button Push the ON/VOLUME control knob to turn on the Pressing the SCAN button causes the tuner to search for radio. Press the ON/VOLUME control knob a second the next listenable station in AM, FM or Satellite (if time to turn off the radio.
Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Button Uconnect™ Phone — If Equipped 3. After adjusting the hours, press the right side TUNE/ Press this button to operate the Uconnect™ Phone feature SCROLL control knob to set the minutes. The minutes (if equipped).
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 RW/FF Push the rotary TUNE/SCROLL control knob a third Pressing the RW (Rewind) or FF (Fast Forward) buttons time and TREBLE will display. Turn the TUNE/SCROLL causes the tuner to search for the next frequency in the control knob to the right or left to increase or decrease the direction of the arrows.
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL or turning the TUNE/SCROLL control knob within five Program Type 16-Digit Character Display seconds will allow the program format type to be se- News News lected. Many radio stations do not currently broadcast Nostalgia Nostalga Music Type information.
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 227 • DVD Enter - When the disc is in DVD Menu mode, By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency selecting DVD Enter will allow you to play the current station with the same selected Music Type name.
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL • Angle – Repeatedly pressing SELECT will change • Set Home Clock - Pressing the SELECT button allows the viewing angle if supported by the DVD disc (if you to set the clock. Turn the TUNE/SCROLL control equipped).
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 Audio Language — If Equipped Audio DRC — If Equipped Selecting this item allows you to choose a default audio Selecting this item allows you to limit maximum audio language (effective only if the language is supported by dynamic range.
Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL a disc is loaded, changes will not be effective. Also, the both AM and FM. This allows a total of 12 AM, 12 FM, defaults are effective only if the disc supports the and 12 Satellite (if equipped) stations to be stored into customer-preferred settings.
Page 233: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
UNDERSTANDING YOUR INSTRUMENT PANEL 231 Operation Instructions - (DISC MODE for CD and NOTE: The ignition switch must be in the ON or ACC MP3/WMA Audio Play, DVD-VIDEO) position to operate the radio. The radio DVD player and many DVD discs are coded by LOAD Button —...
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL Eject Button — Ejecting Compact Disc(s) SCAN Button (CD MODE) Press the EJECT button and the pushbutton Press the SCAN button to scan through each track on the with the corresponding number (1-6) where the CD currently playing.
Page 235: Notes On Playing Mp3/Wma Files
UNDERSTANDING YOUR INSTRUMENT PANEL 233 Notes On Playing MP3/WMA Files The radio uses the following limits for file systems: The radio can play MP3/WMA files; however, acceptable • Maximum number of directory levels: 8 MP3/WMA file recording media and formats are limited. •...
Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL If a disc contains multi-formats, such as CD audio and MPEG Sampling Bit Rate (kbps) MP3/WMA tracks, the radio will only play the MP3/ Specification Frequency (kHz) WMA tracks on that disc. 192, 160, 128, MPEG-1 Audio 48, 44.1, 32 112, 96, 80, 64,...
Page 237: List Button (Disc Mode For Mp3/Wma Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 235 Playback of MP3/WMA Files LIST Button (DISC Mode for MP3/WMA Play) When a medium containing MP3/WMA data is loaded, Pressing the LIST button will bring up a list of all folders the radio checks all files on the medium. If the medium on the disc.
Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for three seconds SCAN Button (Auxiliary Mode) to return to elapsed time display. No function. Operation Instructions - Auxiliary Mode EJECT Button (Auxiliary Mode) The auxiliary (AUX) jack is an audio input jack which No function.
Page 239: Uconnect™ Multimedia (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 237 Operating Instructions — Voice Command System Macrovision (If Equipped) This product incorporates copyright protection technol- For the radio, Refer to “Voice Command” in the ogy that is protected by U.S. patents and other intellec- Uconnect™ User Manual located on the DVD for further tual property rights.
Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL sports, news, entertainment, and programming for chil- 1. The Electronic Serial Number/Sirius Identification dren, directly from its satellites and broadcasting studios. Number (ESN/SID). NOTE: Sirius service is not available in Hawaii and has 2. Your Vehicle Identification Number. limited coverage in Alaska.
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 • Placing objects over or too close to the antenna can Satellite Antenna To ensure optimum reception, do not place items on the cause signal blockage. roof around the rooftop antenna location. Metal objects Operating Instructions - Uconnect™ Multimedia placed within the line of sight of the antenna will cause (Satellite) Mode decreased performance.
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button TUNE Control (Rotary) Pressing the SCAN button causes the tuner to search for Turn the rotary TUNE/SCROLL control knob clockwise the next channel, pausing for eight seconds before con- to increase or counterclockwise to decrease the channel. tinuing to the next.
Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 SETUP Button the SET button twice and SET 2 will show in the display Pressing the SETUP button allows you to select the window. Each button can be set for SET 1 and SET 2. This following items: allows a total of 12 Satellite channels to be stored into pushbutton memory.
Page 244: Operating Instructions
242 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” in the Uconnect™ User Manual located on the DVD for further details. Operating Instructions (Uconnect™ Phone) — If Equipped Refer to “Uconnect™ Phone” in the Uconnect™ User Manual located on the DVD for further details.
Page 245 UNDERSTANDING YOUR INSTRUMENT PANEL 243 Power Switch/Volume Control (Rotary) TIME Button Push the ON/VOLUME control knob to turn on the Press the TIME button to alternate display of the time radio. Push the ON/VOLUME control knob a second and radio frequency. time to turn off the radio.
Page 246 244 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF Push the rotary TUNE/SCROLL control knob a third Pressing the RW (Rewind) or FF (Fast Forward) buttons time and TREBLE will display. Turn the TUNE/SCROLL causes the tuner to search for the next frequency in the control knob to the right or left to increase or decrease the direction of the arrows.
Page 247: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 245 SET/RND Button — To Set the Pushbutton Every time a preset button is used, a corresponding Memory button number will display. When you are receiving a station that you wish to Buttons 1 - 6 commit to pushbutton memory, press the SET/RND These buttons tune the radio to the stations that you button.
Page 248 246 UNDERSTANDING YOUR INSTRUMENT PANEL • This radio is capable of playing compact discs (CD), CAUTION! recordable compact discs (CD-R), rewritable compact • This CD player will accept 4-3/4 in (12 cm) discs discs (CD-RW), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks.
Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 247 If you have ejected a disc and have not removed it within RW/FF 10 seconds, it will be reloaded. If the CD is not removed, Press and hold the FF (Fast Forward) button and the CD the radio will reinsert the CD but will not play it.
Page 250: Notes On Playing Mp3 Files
248 UNDERSTANDING YOUR INSTRUMENT PANEL Notes on Playing MP3 Files The radio uses the following limits for file systems: The radio can play MP3 files; however, acceptable MP3 • Maximum number of folder levels: 8 file recording media and formats are limited. When •...
Page 251 UNDERSTANDING YOUR INSTRUMENT PANEL 249 Multisession disc formats are supported by the radio. rates (VBR) are also supported. The majority of MP3 files Multisession discs may contain combinations of normal use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or CD audio tracks and computer files (including MP3 files).
Page 252: Operation Instructions - Auxiliary Mode
250 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files Operation Instructions - Auxiliary Mode When a medium containing MP3 data is loaded, the The auxiliary (AUX) jack is an audio input jack, which radio checks all files on the medium. If the medium allows the user to plug in a portable device, such as an contains a lot of folders or files, the radio will take more MP3 player, or cassette player, and utilize the vehicle’s...
Page 253: Media Center 130 With Satellite Radio (Sales Code Res+Rsc)
UNDERSTANDING YOUR INSTRUMENT PANEL 251 MEDIA CENTER 130 WITH SATELLITE RADIO Operating Instructions — Radio Mode (SALES CODE RES+RSC) NOTE: The ignition switch must be in the ON or ACC NOTE: The radio sales code is located on the lower right position to operate the radio.
Page 254 252 UNDERSTANDING YOUR INSTRUMENT PANEL SEEK Buttons If your vehicle is not equipped with or this feature is not Press and release the SEEK buttons to search for the next available on your vehicle, a “Not Equipped With listenable station in AM/FM mode. Press the right switch Uconnect Phone”...
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 2. Adjust the hours by turning the right side TUNE/ INFO Button SCROLL control knob. Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio Text 3.
Page 256 254 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a second Push the rotary TUNE/SCROLL control knob again to time and MID will display. Turn the TUNE/SCROLL exit setting tone, balance, and fade. control knob to the right or left to increase or decrease the MUSIC TYPE Button mid-range tones.
Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 255 Program Type 16-Digit Character Display Program Type 16-Digit Character Display College College Soft Rhythm and Blues Soft R&B Country Country Sports Sports Foreign Language Language Talk Talk Information Inform Top 40 Top 40 Jazz Jazz Weather Weather News...
Page 258 256 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button window. Select the button (1–6) you wish to lock onto this Pressing the SETUP button allows you to select between station and press and release that button. If a button is the following items: not selected within five seconds after pressing the SET/ RND button, the station will continue to play but will not •...
Page 259: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 257 Buttons 1 - 6 Inserting Compact Disc(s) These buttons tune the radio to the stations that you Gently insert one CD into the CD player with the CD commit to pushbutton memory (12 AM and 12 FM label facing up.
Page 260 258 UNDERSTANDING YOUR INSTRUMENT PANEL If you have ejected a disc and have not removed it within CAUTION! 10 seconds, it will be reloaded. If the CD is not removed, • This CD player will accept 4–3/4 in (12 cm) discs the radio will reinsert the CD but will not play it.
Page 261: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 259 RW/FF Notes On Playing MP3 Files Press and hold FF (Fast Forward) and the CD player will The radio can play MP3 files; however, acceptable MP3 begin to fast forward until FF is released or RW or file recording media and formats are limited.
Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of files: 255 Discs created with an option such as keep disc open after writing are most likely multisession discs. The use of • Maximum number of folders. (The radio display of file multisession for CD audio or MP3 playback may result in names and folder names is limited.
Page 263 UNDERSTANDING YOUR INSTRUMENT PANEL 261 Playback of MP3 Files MPEG Sampling Bit Rate (kbps) When a medium containing MP3 data is loaded, the Specification Frequency (kHz) radio checks all files on the medium. If the medium 320, 256, 224, contains a lot of folders or files, the radio will take more MPEG-1 Audio 192, 160, 128, 48, 44.1, 32...
Page 264: List Button (Cd Mode For Mp3 Play)
262 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button (CD Mode for MP3 Play) Press and hold the INFO button for three seconds or Pressing the LIST button will bring up a list of all folders more and the radio will display song titles for each file. on the disc.
Page 265: Uconnect™ Multimedia (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 263 TIME Button (Auxiliary Mode) radio system in your vehicle. Sirius will supply a wel- Press this button to change the display to time of day. The come kit that contains general information, including time of day will display for five seconds (when the how to setup your on-line listening account.
Page 266 264 UNDERSTANDING YOUR INSTRUMENT PANEL using the TUNE/SCROLL control knob until Sirius ID is Reception Quality selected. Press the TUNE/SCROLL control knob and the Satellite reception may be interrupted due to one of the Sirius ID number will display. The Sirius ID number following reasons: display will time out in two minutes.
Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 SEEK Buttons additional three seconds will make the radio display the Press and release the SEEK buttons to search for the next Song Title all of the time (press and hold again to return channel in Satellite mode. Press the right switch to seek to normal display).
Page 268 266 UNDERSTANDING YOUR INSTRUMENT PANEL Toggle the MUSIC TYPE button again to select the music SET Button – To Set the Pushbutton Memory type. When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button. By pressing the SEEK button when the Music Type The symbol SET 1 will now show in the display window.
Page 269: Ipod /Usb/Mp3 Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 267 Every time a preset button is used, a corresponding This feature allows an iPod or external USB device to be button number will display. plugged into the USB port, located in the center console or glove compartment. Buttons 1 - 6 These buttons tune the radio to the channels that you iPod control supports Mini, 4G, Photo, Nano, 5G iPod...
Page 270: Connecting The Ipod Or External Usb Device
268 UNDERSTANDING YOUR INSTRUMENT PANEL Connecting The iPod or External USB Device Once the audio device is connected and synchronized to Use the connection cable to connect an iPod or external the vehicle’s iPod /USB/MP3 control system (iPod or USB device to the vehicle’s USB/AUX connector port external USB device may take a few minutes to connect), which is located in the center console or glove compart- the audio device starts charging and is ready for use by...
Page 271: Controlling The Ipod Or External Usb Device Using Radio Buttons
UNDERSTANDING YOUR INSTRUMENT PANEL 269 • The audio device can be controlled using the radio mode. In Play mode, the following buttons on the radio buttons to Play, Browse, and List the iPod contents. faceplate may be used to control the iPod or external USB device and display data: •...
Page 272 270 UNDERSTANDING YOUR INSTRUMENT PANEL • A single press backward << RW or forward FF >> will • Press the SCAN button to use iPod /USB/MP3 de- jump backward or forward respectively, for five vice scan mode, which will play the first 10 seconds of seconds.
Page 273: List Or Browse Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 271 • During all List modes, the iPod displays all lists in List Or Browse Mode During Play mode, pressing any of the buttons described “wrap-around” mode. So if the track is at the below, will bring up List mode. List mode enables bottom of the list, just turn the wheel backwards scrolling through the list of menus and tracks on the (counter-clockwise) to get to the track faster.
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL • Pressing a PRESET button will display the current CAUTION! list on the top line and the first item in that list on • Leaving the iPod or external USB device (or any the second line. supported device) anywhere in the vehicle in •...
Page 275: Bluetooth Streaming Audio (Btsa)
UNDERSTANDING YOUR INSTRUMENT PANEL 273 Bluetooth Streaming Audio (BTSA) 2. After the Ready prompt and the following beep, say Music can be streamed from your cellular phone to the Setup , then Select Audio Devices . Uconnect™ phone system. 3. Say name of the audio device or ask Uconnect™ Controlling BTSA using Radio Buttons phone system to list audio devices.
Page 276: Steering Wheel Audio Controls
274 UNDERSTANDING YOUR INSTRUMENT PANEL STEERING WHEEL AUDIO CONTROLS The right-hand control is a rocker-type switch with a The remote sound system controls are located on the rear pushbutton in the center and controls the volume and surface of the steering wheel. Reach behind the wheel to mode of the sound system.
Page 277: Cd Player
UNDERSTANDING YOUR INSTRUMENT PANEL 275 The button located in the center of the left-hand control CD/DVD DISC MAINTENANCE will tune to the next preset station that you have pro- To keep a CD/DVD in good condition, take the following grammed in the radio preset pushbutton. precautions: CD Player 1.
Page 278: Radio Operation And Mobile Phones
276 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particu- CLIMATE CONTROLS lar disc, it may be damaged (i.e., scratched, reflective The Air Conditioning and Heating System is designed to coating removed, a hair, moisture or dew on the disc) make you comfortable in all types of weather.
Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 Blower Control Temperature Control Rotate this control to regulate the Rotate this control to regulate the tem- amount of air forced through the ven- perature of the air inside the passenger tilation system in any mode. The compartment.
Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL Mode Control (Air Direction) NOTE: For all settings except full cold or full hot, there Rotate this control to choose from sev- is a difference in temperature between the upper and eral patterns of air distribution. You lower outlets.
Page 281 UNDERSTANDING YOUR INSTRUMENT PANEL 279 Defrost Recirculation Control Air is directed through the windshield and side Pressing the Recirculation Control button will window demist outlets. Use this mode with maxi- put the system in recirculation mode. This can mum blower and temperature settings for best wind- be used when outside conditions such as shield and side window defrosting.
Page 282: Automatic Temperature Control (Atc) - If Equipped
280 UNDERSTANDING YOUR INSTRUMENT PANEL • The A/C can be deselected manually without disturb- • MAX A/C ing the mode control selection. For maximum cooling use the A/C and recirculation buttons at the same time. • When the ignition switch is turned to the LOCK •...
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 NOTE: The AUTO position performs best for front seat occupants only. 2. Dial in the temperature you would like the system to maintain by rotating the Temperature Control knob. Once the comfort level is selected, the sys- tem will maintain that level automati- cally using the heating system.
Page 284 282 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Blower Control • The temperature setting can be adjusted at anytime For full automatic operation or for without affecting automatic operation. automatic blower operation turn the knob to AUTO position. In manual • Pressing the Air Conditioning Control button while in mode there are seven blower speeds AUTO mode will cause the LED in the control button that can be individual selected.
Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283...
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL • Floor The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets.
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 • Air Conditioner Control NOTE: • When the ignition switch is turned to the LOCK Press this button to turn on the air conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
Page 288: Operating Tips
286 UNDERSTANDING YOUR INSTRUMENT PANEL • Most of the time, when in Automatic Operation, you Summer Operation can temporarily put the system into Recirculation The engine cooling system in air-conditioned vehicles Mode by pressing the Recirculation button. However, must be protected with a high-quality antifreeze coolant under certain conditions, while in Automatic Mode, to provide proper corrosion protection and to protect the system is blowing air out the defrost vents.
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The windshield, is free of obstructions such as leaves. Leaves Defrost/Floor mode can be used to maintain a clear collected in the air intake may reduce airflow, and if they windshield and provide sufficient heating.
Page 290 288 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions...
Page 291: Starting And Operating
STARTING AND OPERATING CONTENTS Starting Procedures ....293 Manual Transmission — If Equipped ..296 ▫...
Page 292 290 STARTING AND OPERATING ▫ Traction Control System (TCS) ... 313 AutoStick — If Equipped ....302 ▫...
Page 293 STARTING AND OPERATING 291 ▫ Replacement Tires ....339 Tires — General Information ... . . 331 ▫...
Page 294 292 STARTING AND OPERATING ▫ MMT In Gasoline ....354 ▫ Common Towing Definitions ... . 361 ▫...
Page 295: Starting Procedures
STARTING AND OPERATING 293 STARTING PROCEDURES NOTE: • The engine will not start unless the clutch pedal is Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. pressed to the floor. •...
Page 296: Normal Starting
294 STARTING AND OPERATING Tip Start WARNING! Do not press the accelerator. Turn the ignition switch to the START position and release it as soon as the starter Do not attempt to push or tow your vehicle to get it engages.
Page 297: If Engine Fails To Start
STARTING AND OPERATING 295 If Engine Fails To Start CAUTION! If the engine fails to start after you have followed the “Normal Starting” and “Extreme Cold Weather” proce- To prevent damage to the starter, do not crank the dures, it may be flooded. Push the accelerator pedal all engine for more than 15 seconds at a time.
Page 298: Manual Transmission - If Equipped
296 STARTING AND OPERATING Fully press the clutch pedal before you shift gears. As you WARNING! release the clutch pedal, lightly press the accelerator pedal. Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt electrical cord could cause electrocution.
Page 299: Recommended Shift Speeds
STARTING AND OPERATING 297 Use each gear in numerical order, do not skip a gear. Be Recommended Shift Speeds sure the transmission is in first gear, (not third), when To use your manual transmission for optimal fuel starting from a standing position. Damage to the clutch economy, it should be upshifted as listed in the following can result from starting in third gear.
Page 300: Automatic Transmission - If Equipped
298 STARTING AND OPERATING CAUTION! CAUTION! If you skip more than one gear while downshifting Damage to the transmission may occur if the follow- or downshift at too high a vehicle speed, you could ing precautions are not observed: • Shift into PARK only after the vehicle has come to damage the engine, transmission, or clutch.
Page 301: Automatic Transmission Ignition Interlock System
STARTING AND OPERATING 299 Automatic Transmission Ignition Interlock System WARNING! This system prevents the key from being removed unless the shift lever is in PARK. It also prevents shifting out of It is dangerous to move the shift lever out of PARK or PARK unless the key is in the ON or START position, and NEUTRAL if the engine speed is higher than idle the brake pedal is pressed.
Page 302: Gear Ranges
300 STARTING AND OPERATING Gear Ranges Never use PARK while the vehicle is in motion. Apply DO NOT race the engine when shifting from PARK or the parking brake when leaving the vehicle in this range. NEUTRAL positions into another gear range. Always apply the parking brake first, and then place the shift lever in the PARK position.
Page 303 STARTING AND OPERATING 301 WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle. Leaving Before moving the shift lever out of PARK, you must unattended children in a vehicle is dangerous for a turn the ignition from LOCK to ON so the steering number of reasons.
Page 304: Autostick - If Equipped
302 STARTING AND OPERATING DRIVE Operation This range is used for most city and highway driving. NOTE: AutoStick is not functional until the CVT warms up in cold weather. AUTOSTICK — IF EQUIPPED AutoStick is a driver-interactive transmission that offers AutoStick operation is activated in the DRIVE position six manual ratio changes to provide you with more by moving the shift lever side-to-side.
Page 305: General Information
STARTING AND OPERATING 303 • If a downshift would cause the engine to overspeed, AutoStick is deactivated: that shift will not occur until it is safe for the engine. • By holding the shift lever to (+) momentarily However, the CVT will stay in the manually selected •...
Page 306: Four-Wheel Drive Operation - If Equipped
304 STARTING AND OPERATING FOUR-WHEEL DRIVE OPERATION — IF Where one or more wheels have wheel spin or if addi- EQUIPPED tional traction is needed in sand, deep snow, or loose This feature provides full time, on-demand, four–wheel traction surfaces, activate the “4WD LOCK” switch by drive (4WD).
Page 307: Power Steering
STARTING AND OPERATING 305 An advantage of the higher ground clearance is a better If for some reason the power assist is interrupted, it will view of the road, allowing you to anticipate problems. still be possible to steer your vehicle. Under these condi- They are not designed for cornering at the same speeds as tions, you will observe a substantial increase in steering conventional two-wheel drive vehicles any more than...
Page 308: Power Steering Fluid Check
306 STARTING AND OPERATING apparent, and/or the system is not functioning as antici- WARNING! pated. Coordinate inspection efforts through an autho- rized dealer. Continued operation with reduced power steering assist could pose a safety risk to yourself and others. CAUTION! Service should be obtained as soon as possible.
Page 309: Parking Brake
STARTING AND OPERATING 307 If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied.
Page 310 308 STARTING AND OPERATING NOTE: WARNING! • When the parking brake is applied and the automatic • Never leave children alone in a vehicle. Leaving transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime unattended children in a vehicle is dangerous for a will sound to alert the driver.
Page 311: Brake System
STARTING AND OPERATING 309 CAUTION! WARNING! If the Brake System Warning Light remains on with Riding the brakes can lead to brake failure and the parking brake released, a brake system malfunc- possibly a collision. Driving with your foot resting or tion is indicated.
Page 312: Anti-Lock Brake System (Abs)
310 STARTING AND OPERATING WARNING! WARNING! • Pumping of the anti-lock brakes will diminish Driving a vehicle with the “Brake Warning Light” on is dangerous. A significant decrease in braking per- their effectiveness and may lead to a collision. formance or vehicle stability during braking may Pumping makes the stopping distance longer.
Page 313 STARTING AND OPERATING 311 If the “ABS Warning Light” is on, the brake system WARNING! (Continued) should be serviced as soon as possible to restore the • The capabilities of an ABS-equipped vehicle must benefits of anti-lock brakes. If the “ABS Warning Light” never be exploited in a reckless or dangerous does not come on when the ignition switch is turned to manner which could jeopardize the user’s safety...
Page 314 312 STARTING AND OPERATING ABS is activated during braking under certain road or WARNING! stopping conditions. ABS-inducing conditions can in- clude ice, snow, gravel, bumps, railroad tracks, loose The Anti-Lock Brake System (ABS) contains sophis- debris, or panic stops. ticated electronic equipment that may be susceptible to interference caused by improperly installed or You may also experience the following when the brake high output radio transmitting equipment.
Page 315: Electronic Brake Control System
STARTING AND OPERATING 313 ELECTRONIC BRAKE CONTROL SYSTEM Traction Control System (TCS) Your vehicle may be equipped with an optional ad- This system monitors the amount of wheel spin of each of vanced electronic brake control system that includes the driven wheels. If wheel spin is detected, brake Anti-Lock Brake System (ABS), Traction Control System pressure is applied to the slipping wheel(s) and engine (TCS), Brake Assist System (BAS), Electronic Roll Mitiga-...
Page 316: Brake Assist System (Bas)
314 STARTING AND OPERATING Brake Assist System (BAS) WARNING! The BAS is designed to optimize the vehicle’s braking • The Brake Assist System (BAS) cannot prevent the capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- natural laws of physics from acting on the vehicle, ing the rate and amount of brake application and then nor can it increase the traction afforded by prevail-...
Page 317: Electronic Roll Mitigation (Erm)
STARTING AND OPERATING 315 Electronic Roll Mitigation (ERM) NOTE: Anytime the ESC system is in the “Full Off” This system anticipates the potential for wheel lift by mode, ERM is disabled. Refer to “Electronic Stability monitoring the driver’s steering wheel input and the Control (ESC)”...
Page 318: Hill Start Assist (Hsa) - Manual Transmission Only
316 STARTING AND OPERATING • Gear selection matches vehicle uphill direction (i.e., Hill Start Assist (HSA) – Manual Transmission Only vehicle facing uphill is in forward gear; vehicle back- The HSA system is designed to assist the driver when ing uphill is in REVERSE gear). starting a vehicle from a stop on a hill.
Page 319: Electronic Stability Control (Esc)
STARTING AND OPERATING 317 For vehicles not equipped with the EVIC, perform the 8. Rotate the steering wheel back to center and then an following steps: additional half-turn to the right. NOTE: You must complete Steps 1 through 8 within 9.
Page 320 318 STARTING AND OPERATING the vehicle to determine the vehicle path intended by the mode. This mode should be used for most driving driver and compares it to the actual path of the vehicle. situations. ESC should only be turned to “Partial Off” or When the actual path does not match the intended path, “ESC Off”...
Page 321 STARTING AND OPERATING 319 NOTE: To improve the vehicle’s traction when driving In this mode, ESC and TCS, except for the “limited slip” with snow chains, or starting off in deep snow, sand or feature described in the TCS section, are turned off until gravel, it may be desirable to switch to the “Partial Off”...
Page 322: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
320 STARTING AND OPERATING vehicle has been driven several miles (kilometers) at WARNING! speeds greater than 30 mph (48 km/h), see your autho- rized dealer as soon as possible to have the problem With the ESC switched off, the enhanced vehicle diagnosed and corrected.
Page 323: Tire Safety Information
STARTING AND OPERATING 321 NOTE: TIRE SAFETY INFORMATION • The “ESC Activation/Malfunction Indicator Light” Tire Markings and the “ESC OFF Indicator Light” come on momen- tarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESC system will be ON even if it was turned off previously.
Page 324 322 STARTING AND OPERATING • Temporary spare tires are high-pressure compact NOTE: • P (Passenger) - Metric tire sizing is based on U.S. spares designed for temporary emergency use only. design standards. P-Metric tires have the letter “P” Tires designed to this standard have the letter “T” molded into the sidewall preceding the size designa- molded into the sidewall preceding the size designa- tion.
Page 325 STARTING AND OPERATING 323 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light truck tire based on U.S. design standards T = Temporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
Page 326 324 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 327: Tire Identification Number (Tin)
STARTING AND OPERATING 325 Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.
Page 328: Tire Terminology And Definitions
326 STARTING AND OPERATING Tire Terminology and Definitions Term Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and rear door (of a four-door vehicle) running from the sill to the roof. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 329: Tire Loading And Tire Pressure
STARTING AND OPERATING 327 Tire Loading And Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle Tire Placard Location...
Page 330 328 STARTING AND OPERATING To determine the maximum loading conditions of your 3) tire size designed for your vehicle vehicle, locate the statement “The combined weight of 4) cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires.
Page 331 STARTING AND OPERATING 329 4. The resulting figure equals the available amount of NOTE: • The following table shows examples on how to calcu- cargo and luggage load capacity. For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five late total load, cargo/luggage, and towing capacities 150 lb (68 kg) passengers in your vehicle, the amount of of your vehicle with varying seating configurations...
Page 332 330 STARTING AND OPERATING...
Page 333: Tires - General Information
STARTING AND OPERATING 331 Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 334: Tire Inflation Pressures
332 STARTING AND OPERATING Tire Inflation Pressures WARNING! (Continued) The proper cold tire inflation pressure is listed on the left • Unequal tire pressures from one side of the ve- side “B” Pillar. hicle to the other can cause the vehicle to drift to Some vehicles may have Supplemental Tire Pressure the right or left.
Page 335 STARTING AND OPERATING 333 Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the Winter.
Page 336: Tire Pressures For High Speed Operation
334 STARTING AND OPERATING Tire Pressures For High Speed Operation Radial Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle...
Page 337: Compact Spare Tire - If Equipped
STARTING AND OPERATING 335 vehicle has an option for a spare tire matching original CAUTION! equipment tire and wheel, refer to the recommended tire rotation pattern in “Tire Rotation Recommendations” in Because of the reduced ground clearance, do not take “Starting and Operating”...
Page 338: Full Size Spare - If Equipped
336 STARTING AND OPERATING Since this tire has limited tread life the original equip- Full Size Spare – If Equipped ment tire should be repaired (or replaced) and reinstalled The full size spare is for temporary emergency use only. on your vehicle at the first opportunity. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not.
Page 339: Tire Spinning
STARTING AND OPERATING 337 your original equipment tire, replace (or repair) the Tire Spinning original equipment tire and reinstall on the vehicle at the When stuck in mud, sand, snow, or ice conditions, do not first opportunity. spin your vehicle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without WARNING! stopping when you are stuck.
Page 340: Tread Wear Indicators
338 STARTING AND OPERATING Tread Wear Indicators These indicators are molded into the bottom of the tread Tread wear indicators are in the original equipment tires grooves. They will appear as bands when the tread depth to help you in determining when your tires should be becomes 1/16 in (2 mm).
Page 341: Replacement Tires
STARTING AND OPERATING 339 Replacement Tires WARNING! The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for Tires and the spare tire should be replaced after six wear and correct cold tire inflation pressure. The manu- years, regardless of the remaining tread.
Page 342 340 STARTING AND OPERATING WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 343: Tire Chains
STARTING AND OPERATING 341 TIRE CHAINS Snow tires generally have lower speed ratings than what Due to limited clearance, tire chains are not recom- was originally equipped with your vehicle and should mended. not be operated at sustained speeds over 75 mph (120 km/h).
Page 344: Tire Rotation Recommendations
342 STARTING AND OPERATING TIRE ROTATION RECOMMENDATIONS The suggested rotation method is the “rearward cross” The tires on the front and rear of your vehicle operate at shown in the following diagram. This rotation pattern different loads and perform different steering, driving, does not apply to some directional tires that must not be and braking functions.
Page 345: Tire Pressure Monitoring System (Tpms)
STARTING AND OPERATING 343 TIRE PRESSURE MONITORING SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure if The Tire Pressure Monitor System (TPMS) will warn the the tire pressure falls below the low-pressure warning driver of a low tire pressure based on the vehicle recom- limit for any reason, including low temperature effects, or mended cold placard pressure.
Page 346 344 STARTING AND OPERATING For example, your vehicle may have a recommended CAUTION! cold (parked for more than three hours) placard pressure • The TPMS has been optimized for the original of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tire pressure is 27 psi (186 kPa), equipment tires and wheels.
Page 347: Base System
STARTING AND OPERATING 345 • Seasonal temperature changes will affect tire pressure, NOTE: • The TPMS is not intended to replace normal tire care and the TPMS will monitor the actual tire pressure in and maintenance or to provide warning of a tire failure the tire.
Page 348 346 STARTING AND OPERATING • Four Tire Pressure Monitoring Sensors Check TPMS Warnings The Tire Pressure Monitoring Telltale Light will flash on • Tire Pressure Monitoring Telltale Light and off for 75 seconds and remain on solid when a system Tire Pressure Monitoring Low Pressure Warnings fault is detected.
Page 349 STARTING AND OPERATING 347 NOTE: Your vehicle is equipped with a compact spare 4. For each subsequent ignition key cycle, a chime will wheel and tire assembly. sound and the Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds and then remain on 1.
Page 350: Premium System - If Equipped
348 STARTING AND OPERATING • Various Tire Pressure Monitoring System Messages, Premium System – If Equipped The TPMS uses wireless technology with wheel rim which display in the Electronic Vehicle Information mounted electronic sensors to monitor tire pressure lev- Center (EVIC) els.
Page 351 STARTING AND OPERATING 349 the graphic display of the pressure value(s) will stop flashing, and the Tire Pressure Monitoring Light will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information.
Page 352 350 STARTING AND OPERATING will be displayed instead of dashes. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors.
Page 353 STARTING AND OPERATING 351 values are still being received from the TPM sensors but 3. However, after driving the vehicle for up to 20 min- they may not be located in the correct vehicle position. utes above 15 mph (24 km/h), the Tire Pressure Moni- The system still needs to be serviced as long as the toring Telltale Light will flash on and off for 75 seconds CHECK TPM SYSTEM message is displayed.
Page 354: General Information
352 STARTING AND OPERATING limit in any of the four active road tires. The vehicle may FUEL REQUIREMENTS need to be driven for up to 20 minutes above 15 mph 2.0L and 2.4L Engine (24 km/h) in order for the TPMS to receive this This engine is designed to meet all emis- information.
Page 355: Reformulated Gasoline
STARTING AND OPERATING 353 Over 40 auto manufacturers worldwide have issued and Gasoline/Oxygenate Blends endorsed consistent gasoline specifications (the World- Some fuel suppliers blend unleaded gasoline with oxy- wide Fuel Charter, WWFC) which define fuel properties genates such as Ethanol. Fuels blended with oxygenates necessary to deliver enhanced emissions, performance, may be used in your vehicle.
Page 356: E-85 Usage In Non-Flex Fuel Vehicles
354 STARTING AND OPERATING E-85 Usage In Non-Flex Fuel Vehicles More extensive repairs will be required for prolonged Non-FFV vehicles are compatible with gasoline contain- exposure to E-85 fuel. ing 10% ethanol (E10). Gasoline with higher ethanol MMT In Gasoline content may void the vehicle’s warranty.
Page 357: Materials Added To Fuel
STARTING AND OPERATING 355 Materials Added to Fuel CAUTION! (Continued) All gasoline sold in the United States is required to • An out-of-tune engine or certain fuel or ignition contain effective detergent additives. Use of additional malfunctions can cause the catalytic converter to detergents or other additives is not needed under normal overheat.
Page 358: Carbon Monoxide Warnings
356 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper WARNING! maintenance. Have the exhaust system inspected Carbon monoxide (CO) in exhaust gases is deadly. every time the vehicle is raised. Have any abnor- Follow the precautions below to prevent carbon mal conditions repaired promptly.
Page 359 STARTING AND OPERATING 357 After removing the gas cap, place the gas cap tether cable CAUTION! over a hook on the inside of the fuel door. This keeps the • Damage to the fuel system or emission control gas cap suspended away from and protects the vehicle’s surface.
Page 360: Loose Fuel Filler Cap Message
358 STARTING AND OPERATING Loose Fuel Filler Cap Message WARNING! (Continued) If the vehicle diagnostic system determines that the fuel • Never add fuel when the engine is running. This is filler cap is loose or improperly installed, a “gASCAP” in violation of most state and Federal fire regula- message will be displayed in the Odometer/Trip Odom- tions and may cause the MIL to turn on.
Page 361: Vehicle Certification Label
STARTING AND OPERATING 359 Vehicle Certification Label Gross Vehicle Weight Rating (GVWR) Your vehicle has a Vehicle Certification Label attached to The GVWR is the total allowable weight of your vehicle. the driver’s door B-Pillar. This includes driver, passengers, and cargo. The total load must be limited so that you do not exceed the The label contains the following information: GVWR.
Page 362 360 STARTING AND OPERATING Curb Weight Overloading can cause potential safety hazards and The curb weight of a vehicle is defined as the total weight shorten useful service life. Heavier suspension compo- of the vehicle with all fluids, including vehicle fuel, at full nents do not necessarily increase the vehicle’s GVWR.
Page 363: Trailer Towing
STARTING AND OPERATING 361 TRAILER TOWING exceed the GVWR. Refer to “Vehicle Loading/Vehicle In this section you will find safety tips and information Certification Label” in “Starting and Operating” for on limits to the type of towing you can reasonably do further information.
Page 364 362 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Frontal Area The GAWR is the maximum capacity of the front and rear The frontal area is the maximum height multiplied by the axles. Distribute the load over the front and rear axles maximum width of the front of a trailer.
Page 365: Trailer Hitch Classification
STARTING AND OPERATING 363 Weight-Distributing Hitch Trailer Hitch Classification A weight-distributing system works by applying lever- Your vehicle may be factory equipped for safe towing of age through spring (load) bars. They are typically used trailers weighing over 2,000 lbs (907 kg) with the optional for heavier loads, to distribute trailer tongue weight to Trailer Tow Prep Package.
Page 366 364 STARTING AND OPERATING Trailer Hitch Classification Definitions Class Max. Trailer Hitch Industry Standards Class I - Light Duty 2,000 lbs (907 kg) Class II - Medium 3,500 lbs (1 587 kg) Duty Class III - Heavy Duty 5,000 lbs (2 268 kg) Class IV - Extra 10,000 lbs (4 540 kg) Heavy Duty...
Page 367: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 365 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission Frontal Area Max. GTW (Gross Trailer Wt.) Max. Tongue Wt. (See Note) 2.0L Auto/Man 22 sq ft (2.04 sq m) 1,000 lbs (450 kg) 150 lbs (50 kg)
Page 368: Towing Requirements
366 STARTING AND OPERATING • The weight of any other type of cargo or equipment Never exceed the maximum trailer tongue weight stamped on your bumper or trailer hitch. put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle.
Page 369 STARTING AND OPERATING 367 CAUTION! WARNING! • Do not tow a trailer at all during the first 500 miles Improper towing can lead to a collision. Follow these (805 km) the new vehicle is driven. The engine, guidelines to make your trailer towing as safe as axle or other parts could be damaged.
Page 370 368 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Safety chains must always be used between your 3. GAWR vehicle and trailer. Always connect the chains to 4. Tongue weight rating for the trailer hitch utilized the frame or hook retainers of the vehicle hitch. (This requirement may limit the ability to always Cross the chains under the trailer tongue and achieve the 10% to 15% range of tongue weight as a...
Page 371 STARTING AND OPERATING 369 − Check for signs of tire wear or visible tire damage actuated brakes. When towing a trailer equipped with before towing a trailer. Refer to “Tires – General a hydraulic surge actuated brake system, an electronic Information”...
Page 372 370 STARTING AND OPERATING Towing Requirements – Trailer Lights and Wiring WARNING! Your authorized dealer offers a trailer wiring harness • Do not connect trailer brakes to your vehicle’s designed specifically for your vehicle. hydraulic brake lines. It can overload your brake Whenever you pull a trailer, regardless of the trailer size, system and cause it to fail.
Page 373 STARTING AND OPERATING 371 Four-Pin Connector Seven-Pin Connector 1 — Female Pins 4 — Park 1 — Battery 5 — Ground 2 — Male Pin 5 — Left Stop/Turn 2 — Backup Lamps 6 — Left Stop/Turn 3 — Ground 6 —...
Page 374: Towing Tips
372 STARTING AND OPERATING Towing Tips Cooling System Before setting out on a trip, practice turning, stopping To reduce the potential for engine and transmission and backing the trailer in an area away from heavy overheating, take the following actions: traffic.
Page 375: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 373 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing Condition Wheels OFF the Ground Manual Transmission Automatic Transmis- sion Flat Tow None • Transmission in NEUTRAL • Key in ACC Front OK (FWD Only) Dolly Tow Rear On Trailer NOTE: Vehicles equipped with manual transmissions CAUTION! may be recreationally towed (flat towed) at any legal...
Page 376 374 STARTING AND OPERATING CAUTION! (Continued) • Front or rear wheel lifts should not be used. Internal damage to the transmission or transfer case will occur if a front or rear wheel lift is used when recreational towing.
Page 377: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flashers ....376 Jump-Starting Procedures ....386 ▫...
Page 378: Hazard Warning Flashers
376 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel, below the radio. potential for overheating by taking the appropriate ac- tion.
Page 379: Automatic Transmission Overheating
WHAT TO DO IN EMERGENCIES 377 CAUTION! WARNING! Driving with a hot cooling system could damage You or others can be badly burned by hot engine your vehicle. If the pointer rises to the H (red) mark, coolant (antifreeze) or steam from your radiator. If the instrument cluster will sound a chime.
Page 380: Jacking And Tire Changing
378 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! (Continued) • The jack is designed to be used as a tool for WARNING! changing tires only. The jack should not be used to • Do not attempt to change a tire on the side of the lift the vehicle for service purposes.
Page 381: Spare Tire Stowage
WHAT TO DO IN EMERGENCIES 379 Preparations For Jacking 1. Park the vehicle on a firm level surface, avoiding ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
Page 382: Jacking Instructions
380 WHAT TO DO IN EMERGENCIES 6. Block both the front and rear of the WARNING! (Continued) wheel diagonally opposite the jacking • Always park on a firm, level surface as far from position. For example, if changing the the edge of the roadway as possible before raising right front tire, block the left rear the vehicle.
Page 383 WHAT TO DO IN EMERGENCIES 381 WARNING! (Continued) CAUTION! • If working on or near a roadway, be extremely Do not attempt to raise the vehicle by jacking on careful of motor traffic. locations other than those indicated in the Jacking •...
Page 384 382 WHAT TO DO IN EMERGENCIES CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in Step 3. NOTE: There are front and rear jacking locations on each side of the body. The front locations are outlined by two triangular cutouts, the rear locations by two rectan- gular cutouts.
Page 385 WHAT TO DO IN EMERGENCIES 383 3. Turn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed.
Page 386 384 WHAT TO DO IN EMERGENCIES 5. Remove the wheel nuts and pull the wheel and wheel covers, where applicable, off the hub. Install the spare wheel and wheel nuts with the cone shaped end of the nuts toward the wheel. Lightly tighten the nuts. WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle...
Page 387 WHAT TO DO IN EMERGENCIES 385 NOTE: The wheel cover is held on the wheel by the WARNING! wheel nuts. When reinstalling the original wheel, prop- erly align the wheel cover to the valve stem, place the A loose tire or jack thrown forward in a collision or wheel cover onto the wheel, then install the wheel nuts.
Page 388: Jump-Starting Procedures
386 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES CAUTION! If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in Do not use a portable battery booster pack or any another vehicle or by using a portable battery booster other booster source with a system voltage greater pack.
Page 389: Preparations For Jump-Start
WHAT TO DO IN EMERGENCIES 387 Preparations For Jump-Start The battery in your vehicle is located in the front of the engine compartment below the air intake duct. To access the battery remove the air intake duct by turning the two finger screws, located on the radiator support.
Page 390: Jump-Starting Procedure
388 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park WARNING! the vehicle within the jumper cables reach, set the • Take care to avoid the radiator cooling fan when- parking brake and make sure the ignition is OFF. ever the hood is raised.
Page 391 WHAT TO DO IN EMERGENCIES 389 4. Connect the opposite end of the negative (-) jumper CAUTION! cable to a good engine ground (exposed metal part of the discharged vehicle’s engine) away from the battery and Failure to follow these procedures could result in the fuel injection system.
Page 392: Freeing A Stuck Vehicle
390 WHAT TO DO IN EMERGENCIES 7. Disconnect the negative end (-) of the jumper cable CAUTION! from the negative (-) post of the booster battery. Accessories that can be plugged into the vehicle 8. Disconnect the opposite end of the positive (+) jumper power outlets draw power from the vehicle’s battery, cable from the positive (+) post of the booster battery.
Page 393 WHAT TO DO IN EMERGENCIES 391 CAUTION! CAUTION! • When “rocking” a stuck vehicle by moving be- Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the en- tween DRIVE/1st gear and REVERSE, do not spin gine to idle with the shift lever in NEUTRAL for at the wheels faster than 15 mph (24 km/h), or drive- least one minute after every five rocking-motion...
Page 394: Shift Lever Override
392 WHAT TO DO IN EMERGENCIES WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehi- cle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stop- ping when you are stuck and do not let anyone near...
Page 395: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES 393 6. Move the shift lever into the NEUTRAL position. CAUTION! 7. The vehicle may then be started in NEUTRAL. DO NOT flat tow any vehicle equipped with an 8. Reinstall the shift lever override access cover. automatic transmission.
Page 396: Without The Ignition Key
394 WHAT TO DO IN EMERGENCIES All Transmissions CAUTION! (Continued) If you must use the accessories (wipers, defroster, etc.) • Do not attempt to use sling-type equipment when while being towed (wipers, defrosters, etc.), the key must towing. When securing the vehicle to a flatbed be in the ON position, not the ACC position.
Page 397: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Oil ......403 Engine Compartment — 2.0L ... . . 397 ▫...
Page 398 396 MAINTAINING YOUR VEHICLE ▫ Cooling System ..... 413 Replacement Bulbs ....434 ▫...
Page 399: Engine Compartment - 2.0L
MAINTAINING YOUR VEHICLE 397 ENGINE COMPARTMENT — 2.0L 1 — Washer Fluid Reservoir 6 — Battery (Under Cover) 2 — Engine Oil Fill 7 — Coolant Pressure Cap 3 — Air Cleaner Filter 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 400: Engine Compartment - 2.4L
398 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 2.4L 1 — Washer Fluid Reservoir 6 — Battery (Under Cover) 2 — Engine Oil Fill 7 — Coolant Pressure Cap 3 — Air Cleaner Filter 8 — Engine Oil Dipstick 4 — Brake Fluid Reservoir 9 —...
Page 401: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 399 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
Page 402: Emissions Inspection And Maintenance Programs
400 MAINTAINING YOUR VEHICLE persists, the message will appear the next time the Normally, the OBD II system will be ready. The OBD II vehicle is started. This might indicate a damaged cap. If system may not be ready if your vehicle was recently the problem is detected twice in a row, the system will serviced, recently had a dead battery or a battery replace- turn on the MIL.
Page 403: Replacement Parts
MAINTAINING YOUR VEHICLE 401 4. Approximately 15 seconds later, one of two things will system to update. A recheck with the above test routine happen: may then indicate that the system is now ready. a. The MIL will flash for about 10 seconds and then Regardless of whether your vehicle’s OBD II system is return to being fully illuminated until you turn OFF ready or not, if the MIL is illuminated during normal...
Page 404: Dealer Service
402 MAINTAINING YOUR VEHICLE DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance nel, special tools, and equipment to perform all service services determined by the engineers who designed your operations in an expert manner.
Page 405: Engine Oil
MAINTAINING YOUR VEHICLE 403 Engine Oil CAUTION! (Continued) Checking Oil Level • Your vehicle has been built with improved fluids To assure proper engine lubrication, the engine oil must that protect the performance and durability of be maintained at the correct level. Check the oil level at your vehicle and also allow extended maintenance regular intervals, such as every fuel stop.
Page 406 404 MAINTAINING YOUR VEHICLE Engine Oil Selection CAUTION! For best performance and maximum protection for all engines under all types of operating conditions, the Do not overfill the engine. Overfilling the engine manufacturer recommends engine oils that are API Cer- will cause oil aeration, which can lead to loss of oil tified and meet the requirements of Chrysler Material pressure and an increase in oil temperature.
Page 407 MAINTAINING YOUR VEHICLE 405 Synthetic Engine Oils CAUTION! You may use synthetic engine oils provided the recom- mended oil quality requirements are met, and the recom- Do not use chemical flushes in your engine oil as the mended maintenance intervals for oil and filter changes chemicals can damage your engine.
Page 408: Engine Oil Filter
406 MAINTAINING YOUR VEHICLE Engine Oil Filter WARNING! The engine oil filter should be replaced with a new filter at every engine oil change. The air cleaner can provide a measure of protection in the case of engine backfire. Do not remove the air Engine Oil Filter Selection cleaner unless such removal is necessary for repair or All of this manufacturer’s engines have a full-flow type...
Page 409: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 407 Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. • Battery gas is flammable and explosive. Keep You will never have to add water, nor is periodic main- flame or sparks away from the battery. Do not use tenance required.
Page 410: Air Conditioner Maintenance
408 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance CAUTION! For best possible performance, your air conditioner • It is essential when replacing the cables on the should be checked and serviced by an authorized dealer at the start of each warm season. This service should battery that the positive cable is attached to the include cleaning of the condenser fins and a performance positive post and the negative cable is attached to...
Page 411: Body Lubrication
MAINTAINING YOUR VEHICLE 409 Protection Agency and is an ozone-saving product. How- WARNING! ever, the manufacturer recommends that air conditioning • Use only refrigerants and compressor lubricants service be performed by authorized dealers or other service facilities using recovery and recycling equipment. approved by the manufacturer for your air condi- tioning system.
Page 412: Windshield Wiper Blades
410 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. from a dry windshield. Avoid using the wiper blades to When performing other underhood services, the hood remove frost or ice from the windshield. Make sure that latch, release mechanism and safety catch should be they are not frozen to the glass before turning them on to cleaned and lubricated.
Page 413: Exhaust System
MAINTAINING YOUR VEHICLE 411 into the passenger compartment. In addition, inspect the WARNING! exhaust system each time the vehicle is raised for lubri- cation or oil change. Replace as required. Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care WARNING! must be exercised when filling or working around the washer solution.
Page 414 412 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- • The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst leaded fuel only.
Page 415: Cooling System
MAINTAINING YOUR VEHICLE 413 To minimize the possibility of catalytic converter dam- Cooling System age: WARNING! • Do not shut off the engine or interrupt the ignition, • When working near the radiator cooling fan, dis- when the transmission is in gear and the vehicle is in motion.
Page 416 414 MAINTAINING YOUR VEHICLE Coolant Checks Cooling System – Drain, Flush, and Refill Check engine coolant (antifreeze) protection every Refer to the “Maintenance Schedule” for the proper 12 months (before the onset of freezing weather, where maintenance intervals. applicable). If the engine coolant (antifreeze) is dirty or If the engine coolant (antifreeze) is dirty or contains a rusty in appearance, the system should be drained, considerable amount of sediment, clean and flush with a...
Page 417 MAINTAINING YOUR VEHICLE 415 CAUTION! CAUTION! (Continued) • This vehicle has not been designed for use with • Mixing of engine coolant (antifreeze) other than Propylene Glycol based engine coolant (anti- specified Hybrid Organic Additive Technology freeze). Use of Propylene Glycol based engine (HOAT) engine coolant (antifreeze), may result in coolant (antifreeze) is not recommended.
Page 418 416 MAINTAINING YOUR VEHICLE Please review these recommendations for using Hybrid Please note that it is the owner’s responsibility to main- Organic Additive Technology (HOAT) engine coolant tain the proper level of protection against freezing ac- (antifreeze). When adding engine coolant (antifreeze): cording to the temperatures occurring in the area where the vehicle is operated.
Page 419 MAINTAINING YOUR VEHICLE 417 rules for your community. To prevent ingestion by ani- WARNING! mals or children do not store ethylene glycol-based • The warning words “DO NOT OPEN HOT” on engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground.
Page 420 418 MAINTAINING YOUR VEHICLE • Check the coolant freeze point in the radiator and in When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the the coolant recovery bottle. If engine coolant (anti- coolant bottle.
Page 421: Brake System
MAINTAINING YOUR VEHICLE 419 • Keep the front of the radiator clean. If your vehicle is WARNING! equipped with air conditioning, keep the front of the Riding the brakes can lead to brake failure and condenser clean. possibly a collision. Driving with your foot resting or •...
Page 422 420 MAINTAINING YOUR VEHICLE NOTE: If your vehicle is equipped with a manual WARNING! transmission , the brake fluid reservoir supplies fluid to • Use only manufacturer’s recommended brake both the brake system and the clutch release system. The two systems are separated in the reservoir, and a leak in fluid.
Page 423 MAINTAINING YOUR VEHICLE 421 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contami- moisture, use only new brake fluid or fluid that nate the brake fluid. Brake seal components could has been in a tightly closed container.
Page 424: Automatic Transmission (Cvt) - If Equipped
422 MAINTAINING YOUR VEHICLE Automatic Transmission (CVT) – If Equipped Special Additives Do not add any materials (other than leak detection dyes) Selection Of Lubricant to Continuously Variable Transmission (CVT) Fluid It is important that the proper lubricant is used in the (CVTF+4 ).
Page 425: Manual Transmission - If Equipped
MAINTAINING YOUR VEHICLE 423 Fluid And Filter Changes the vehicle. Fluid changes are not necessary unless lubri- Refer to the “Maintenance Schedule” for the proper cant has become contaminated with water. maintenance intervals. NOTE: If contaminated with water, the fluid should be Manual Transmission –...
Page 426: Power Transfer Unit (Ptu) - Awd/4Wd
424 MAINTAINING YOUR VEHICLE Frequency Of Fluid Change Frequency Of Fluid Change Refer to the “Maintenance Schedule” for the proper Refer to the “Maintenance Schedule” for the proper maintenance intervals. maintenance intervals. Power Transfer Unit (PTU) – AWD/4WD Models Appearance Care and Protection from Corrosion Only Protection of Body and Paint from Corrosion Lubricant Selection...
Page 427 MAINTAINING YOUR VEHICLE 425 • If insects, tar or other similar deposits have accumu- What Causes Corrosion? Corrosion is the result of deterioration or removal of lated on your vehicle, use MOPAR Super Kleen Bug paint and protective coatings from your vehicle. and Tar Remover or equivalent to remove.
Page 428 426 MAINTAINING YOUR VEHICLE • If a lot of driving is done on gravel roads, consider Special Care mud or stone shields behind each wheel. • If you drive on salted or dusty roads or if you drive • Use MOPAR near the ocean, hose off the undercarriage at least once Touch Up Paint or equivalent on a month.
Page 429 MAINTAINING YOUR VEHICLE 427 Stain Repel Fabric Cleaning Procedure – If Interior Care Equipped Use MOPAR Total Clean or equivalent to clean fabric Stain Repel seats may be cleaned in the following man- upholstery and carpeting. ner: Use MOPAR Total Clean or equivalent to clean vinyl •...
Page 430 428 MAINTAINING YOUR VEHICLE Glass Surfaces WARNING! All glass surfaces should be cleaned on a regular basis with MOPAR Glass Cleaner or any commercial Do not use volatile solvents for cleaning purposes. household-type glass cleaner. Never use an abrasive type Many are potentially flammable, and if used in cleaner.
Page 431: Fuses
MAINTAINING YOUR VEHICLE 429 Instrument Panel Bezels Seat Belt Maintenance Do not bleach, dye or clean the seat belts with chemical CAUTION! solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. When installing hanging air fresheners in your ve- If the seat belts need cleaning, use a mild soap solution or hicle, read the installation instructions carefully.
Page 432 430 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini- Description Fuse Fuse Light Switch 10 Amp Ignition Switch/ Occupant Classifica- tion Module 20 Amp Trailer Tow Yellow 10 Amp Power Mirror/ Steering Control Sat- ellite Radio/Hands- Free Phone Integrated Power Module 30 Amp Ignition Off Draw Green Cavity Cartridge...
Page 433 MAINTAINING YOUR VEHICLE 431 Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description Fuse Fuse Fuse Fuse Yellow Lighting 40 Amp Auto Shutdown Relay Green 15 Amp Power Outlet Lt Blue 20 Amp Radio Amplifiers Yellow 20 Amp 115V AC Inverter Yellow 15 Amp Radio...
Page 434 432 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini- Description Cavity Cartridge Mini- Description Fuse Fuse Fuse Fuse 15 Amp Auto Shutdown Relay Module Lt Blue 30 Amp Antilock BrakeValve 10 Amp Airbag Control Mod- Pink 40 Amp Antilock Brake Pump 10 Amp Airbag Control Green Module/Occupant...
Page 435: Vehicle Storage
MAINTAINING YOUR VEHICLE 433 VEHICLE STORAGE CAUTION! If you will not be using your vehicle for more than • When installing the IPM cover, it is important to 21 days, you may want to take steps to preserve your battery. ensure the cover is properly positioned and fully latched.
Page 436: Replacement Bulbs
434 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS LIGHTS BULBS – Exterior Bulb No. All the inside bulbs are brass or glass wedge base. Low Beam Headlamp ..... H11 Aluminum base bulbs are not approved and should not High Beam Headlamp .
Page 437: Bulb Replacement
MAINTAINING YOUR VEHICLE 435 BULB REPLACEMENT 2. Reach into the engine compartment and pull the red lock out at the green connector. Headlamps 1. Raise the hood and locate the connector behind the headlamp.
Page 438 436 MAINTAINING YOUR VEHICLE 3. Remove green connector from back of bulb by pulling 4. Twist the bulb to the left. straight back.
Page 439: Fog Lamps
MAINTAINING YOUR VEHICLE 437 5. Pull bulb outward from assembly. Fog Lamps 1. Access lamp through the lower fascia cutout. 2. Remove electrical connector from bulb. 3. Remove bulb from housing. NOTE: These are halogen bulbs. Take care not to touch the bulb with your fingers.
Page 440: Real Tail, Turn Signal And Backup Lamp
438 MAINTAINING YOUR VEHICLE Real Tail, Turn Signal and Backup Lamp 2. Grasp the taillamp and pull firmly to disengage the lamp from the aperture panel. 1. Remove the two push-pins from the taillamp housing.
Page 441: License Lamps
MAINTAINING YOUR VEHICLE 439 3. Twist and remove socket from lamp. License Lamps 4. Remove bulb from socket and replace. 1. Use a screw driver to gently pry against the side of the snap tab to remove the lamp from the liftgate.
Page 442: Center High-Mounted Stoplamp
440 MAINTAINING YOUR VEHICLE 2. Rotate the socket 1/4 turn counterclockwise. Center High-Mounted Stoplamp This light is an LED assembly. See your authorized dealer 3. Pull bulb from socket. for replacement.
Page 443: Fluid Capacities
MAINTAINING YOUR VEHICLE 441 FLUID CAPACITIES U.S. Metric Fuel (Approximate) 13.6 Gallons 51.5 Liters Engine Oil with Filter 2.0L and 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 4.26 Liters Cooling System * 2.0L and 2.4L Engine (MOPAR Engine Coolant/Antifreeze 5 7.2 Quarts 6.8 Liters Year/100,000 Mile Formula or equivalent)
Page 444: Fluids, Lubricants, And Genuine Parts
442 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hy- brid Organic Additive Technology) or equivalent. Engine Oil Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Page 445: Chassis
MAINTAINING YOUR VEHICLE 443 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission (CVT) – If MOPAR CVTF+4 Equipped Manual Transmission – If Equipped MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed ATF+4 product. Rear Drive Assembly (RDA) MOPAR Gear & Axle Lubricant SAE 80W-90 API GL 5 or equivalent non-synthetic product.
Page 447 MAINTENANCE SCHEDULES CONTENTS ▫ Required Maintenance Intervals ..448 Maintenance Schedule ....446...
Page 448 446 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE Based on engine operation condition, the oil change The Scheduled Maintenance services listed in this indicator message will illuminate; this means that service manual must be done at the times or mileages specified is required for your vehicle. Have your vehicle serviced to protect your vehicle warranty and ensure the best as soon as possible, within the next 500 miles (805 km).
Page 449 MAINTENANCE SCHEDULES 447 scheduled oil change is performed by someone other Once a Month than your authorized dealer, the message can be reset by • Check the tire pressure and look for unusual wear or referring to the steps described under “Electronic Vehicle damage.
Page 450 448 MAINTENANCE SCHEDULES CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle. Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages for the required maintenance intervals.
Page 451 MAINTENANCE SCHEDULES 449 8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 452: Service Schedule
450 MAINTENANCE SCHEDULES 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 453 MAINTENANCE SCHEDULES 451 40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 454 452 MAINTENANCE SCHEDULES 56,000 Miles (91,000 km) or 64,000 Miles (104,000 km) or 48 Months Maintenance Service 42 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 455 MAINTENANCE SCHEDULES 453 72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 456 454 MAINTENANCE SCHEDULES 88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). Odometer Reading Date Repair Order #...
Page 457 MAINTENANCE SCHEDULES 455 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏...
Page 458 456 MAINTENANCE SCHEDULES 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 459 MAINTENANCE SCHEDULES 457 120,000 Miles (195,000 km) or 128,000 Miles (208,000 km) or 96 Months Maintenance Service 90 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 460 458 MAINTENANCE SCHEDULES 136,000 Miles (221,000 km) or 144,000 Miles (234,000 km) or 108 Months Maintenance Service 102 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 461 MAINTENANCE SCHEDULES 459 † This maintenance is recommended by the manufacturer 152,000 Miles (247,000 km) or to the owner, but is not required to maintain emissions 114 Months Maintenance Service warranty. Schedule ❏ Change the engine oil and engine oil filter. ❏...
Page 463: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Suggestions For Obtaining Service For Your Vehicle......463 Speech Impaired (TDD/TTY) .
Page 464 462 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... 469 Department Of Transportation Uniform Tire Quality Grades ......469 ▫...
Page 465: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 463 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
Page 466: Chrysler Group Llc Customer Center
464 IF YOU NEED CONSUMER ASSISTANCE • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- Chrysler Group LLC Customer Center solved with this process. P.O.
Page 467: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
IF YOU NEED CONSUMER ASSISTANCE 465 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
Page 468: Warranty Information
466 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment WARRANTY INFORMATION when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
Page 469: In Canada
IF YOU NEED CONSUMER ASSISTANCE 467 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, you a group of vehicles, it may order a recall and remedy should contact the Customer Service Department immedi- campaign.
Page 470 468 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the infor- These Owner’s Manuals have been prepared with the mation that students and professional technicians need assistance of service and engineering specialists to in diagnosing/troubleshooting, problem solving, main- acquaint you with specific Chrysler Group LLC ve- taining, servicing, and repairing Chrysler Group LLC...
Page 471 IF YOU NEED CONSUMER ASSISTANCE 469 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
Page 472 470 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
Page 473 INDEX...
Page 474 472 INDEX ABS (Anti-Lock Brake System) ....310 Airbag, Window (Side Curtain) ... 63,65,68 Adding Engine Coolant (Antifreeze) ..415 Alarm Light .
Page 475 INDEX 473 Overheating ......377 Brake/Transmission Interlock ....299 Selection Of Lubricant .
Page 476 474 INDEX Cargo Light ......178 Cleaning Cargo Load Floor ......181 Wheels .
Page 477 INDEX 475 Adding Coolant (Antifreeze) ....415 Dimmer Switch, Headlight ....150 Coolant Level .
Page 478 476 INDEX Traction Control System ....313 Oil Filler Cap ..... . 398,405 Electronic Speed Control (Cruise Control) .
Page 479 INDEX 477 Turn Signal ..... . 87,195,438 Adding ......356 Flat Tire Stowage .
Page 480 478 INDEX Gas Cap (Fuel Filler Cap) ... . 356,358,399 Head Restraints ......141 Gasoline (Fuel) .
Page 481 INDEX 479 Ignition ....... 12 Jump Starting ......386 .
Page 482 480 INDEX Light Bulbs ......87,434 High Beam Indicator ....196 Lights .
Page 483 INDEX 481 Locks Master Cylinder (Brakes) ....419 Child Protection ......32 Methanol .
Page 484 482 INDEX Occupant Restraints (Sedan) ... 62,63,65,68 Operator Manual (Owner’s Manual) ... . 5 Octane Rating, Gasoline (Fuel) ....352 Overdrive .
Page 485 INDEX 483 Sunroof ......166 Rear Wiper/Washer ..... . 184 Transfer Unit .
Page 486 484 INDEX Restraints, Infant ......74 And Pregnant Women ....59 Restraints, Occupant .
Page 487 INDEX 485 Sentry Key Replacement ....15 Starting ....... 293 Service Assistance .
Page 488 486 INDEX System, Remote Starting ....25 Changing ......378 Compact Spare .
Page 489 INDEX 487 Spinning ......337 Automatic ....12,293,298,422 Tread Wear Indicators .
Page 490 488 INDEX Uniform Tire Quality Grades ....469 Warning, Roll Over ......4 Universal Consumer Interface (UCI) Connector .
Page 491 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 492 Chrysler Group LLC 11MK49-126-AB Printed in U.S.A. 2nd Edition...

Jeep Compass 2011 Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Jeep Compass 2011

Summary of Contents for Jeep Compass 2011