Table of Contents
Advertisement
23_H6_OM_EN_IN_t.book Page 239
WARNING!
A loose tire or jack thrown forward in a collision
or hard stop could endanger the occupants of
the vehicle. Always stow the jack parts and the
spare tire in the places provided. Have the
deflated (flat) tire repaired or replaced
immediately.
15. After 25 miles (40 km), check the wheel bolt
torque with a torque wrench to ensure that all
wheel bolts are properly seated against the
wheel.
EC D
O
C
ECLARATION
F
ONFORMANCE
1. The undersigned, Jaswant Singh,
representing the Moonlight Tools Pvt. Ltd.,
herewith declares that the machinery
described below fulfills all the relevant
provisions of:
The EC-directive 2006/42/EC on
Machinery
2. Description of machinery.
a.
Generic Denomination:
Pantograph jack
b.
Function:
Lifting Motor Vehicle
Model
Model
Working
Type
Code
Name
H6 (596)
DUV
MLF1
3. Manufacturer Detail
Moonlight Tools Pvt. Ltd.
Vill. Jaspalon, G.T. Road Doraha
Distt. Ludhiana (141421) Punjab (India)
Teh. PH. No. 01628 258302
4. Authorized Person to compile the technical file
Mr. jaswant Singh DGM (QA & Dev.)
Moonlight Tools Pvt. Ltd.
Ludhiana
IN CASE OF EMERGENCY
5. Reference standard : PF-90065
Date
Place
Doraha
29–03–
2017
Ludhiana
load
1250Kg
NOTE:
This declaration becomes invalid, if technical or
operational modifications are introduced without
the manufactures consent. Follow operational
manual and instructions for use.
JUMP STARTING
If your vehicle has a discharged battery, it can be
jump started using a set of jumper cables and a
battery in another vehicle or by using a portable
battery booster pack. Jump starting can be
dangerous if done improperly, so please follow the
procedures in this section carefully.
239
Signature
Seal
Advertisement
Table of Contents
