Table of Contents
Advertisement
• ▼ - Decreases the flashing parameter being displayed. To move about the
list of interval insulation measurements in the R(t) function.
If the ▲ button or ▼ button is held down, the movement between
parameters is increased to a faster rate.
Model 5060 only:
• MEM - Saves measured values.
• MR - Recalls saved data.
• PRINT MEM - Prints memory contents.
• Printing measurement data is completed through DataView
2.3 DIGITAL FEATURES
Main Display
Indicates the value of:
• Insulation measurement (resistance, DAR and PI, DD, capacitance).
Small Display
Indicates:
• Voltage measured or applied by the instrument.
• Elapsed time or the output voltage, during insulation measurement.
After recording a set of data (5060), the small display also indicates the time and
date in MR (memory recall) mode, and the memory address with the OBJ : TEST
number.
2.4 BARGRAPH
■ Active during insulation measurement (0.1MΩ to 1TΩ).
■ Indicates the battery charge at start-up.
■ Indicates free memory space. One segment represents approximately 100
groups of saved values with each group holding approximately 50 recordings
(1 OBJ and 1 TEST).
12
COM
MEM MR
PI
nd
2
DARDD
ALARM
min sec
V
DC
AC
OBJ.
TEST
GΩ
MΩ kΩ
µA nA µF
P
SMOOTH REMOTE
Megohmmeter Models 5050 & 5060
software.
®
TΩ
Advertisement
Table of Contents
