Precautions For Use; Receiving Your Shipment; Ordering Information - AEMC 5050 User Manual

Megohmmeter
Hide thumbs Also See for 5050:
Table of Contents

Advertisement

1.1 PRECAUTIONS FOR USE

These safety warnings are provided to ensure the safety of personnel and proper
operation of the instrument.
■ Do not attempt to perform any tests with these instruments until you have read
the instruction manual.
■ Safety is the responsibility of the operator!
■ Tests are to be carried out only on non-energized circuits! Check for live
circuits before making resistance measurements (safety check).
■ High voltage is present, as is the sample connected to it. Anyone performing
or assisting in testing must follow all safety precautions to prevent electrical
shock to themselves and others.
■ Use personal protective equipment where appropriate.
■ When testing samples with a capacitive component, make sure they have
been properly discharged and are safe to touch. Dielectric insulation samples
should be short-circuited for at least five times the amount of time they were
energized.
■ Megohmmeters should never be used in an explosive environment.
■ Only use the leads that are supplied with the megohmmeter. If they are
defective or worn, replace before testing.
■ This instrument can be used on installations rated for 1000V, Category III.

1.2 RECEIVING YOUR SHIPMENT

■ Match the contents with the ordering information.
■ Notify your distributor of any missing items.
■ If the equipment appears to be damaged, file a claim immediately with the
carrier and notify your distributor at once.
NOTE: Fully charge the instrument before use.

1.3 ORDERING INFORMATION

Megohmmeter Model 5050............................................................. Cat. #2130.20
Includes extra large classic tool bag, set of three 10 ft (5kV) safety leads (red/
black/blue) with clips, one guard terminal jumper lead, US 115V power cord,
rechargeable battery pack, and user manual.
Megohmmeter Model 5060............................................................. Cat. #2130.21
Includes extra large tool bag, set of three 10 ft (5kV) safety leads (red/black/blue)
with clips, one guard terminal jumper lead, US power cord, rechargeable battery
pack, USB A-B cable, USB stick with DataView
Megohmmeter Models 5050 & 5060
software, and user manual.
®
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

5060

Table of Contents