Table of Contents
Advertisement
PURELAB Classic Operator Manual
Mains power socket
Fuse
ON/OFF
switch
Mains power lead
UV Lamp
Classic with UV Lamp
Page 2
2. HEALTH AND SAFETY NOTES
PURELAB Classic products have been designed to be safe,
however, it is important that personnel working on these units
understand any potential dangers. All safety information detailed in
this
handbook
is
highlighted
instructions. These are used as follows:
WARNING!
CAUTION!
2.1
Electricity
It is essential that the electrical supply to the PURELAB Classic is
isolated before any items are changed or maintenance work
performed.
The ON/OFF switch is located at the left-hand side of the unit. The
mains power lead is located just behind the ON /OFF switch.
WARNING!
The main water supply should be isolated and residual pressure
released prior to removal of any Purification Packs or carrying out
work on the unit.
Switching off the electrical supply will isolate the source of mains
water pressure.
2.2
Ultraviolet Light
WARNING!
The Classic UV and Classic UVF units are fitted with an ultraviolet
lamp. The UV lamp is enclosed in a stainless steel chamber ensuring
that the operator will not be exposed to UV light.
2.3
Control of Substances Hazardous to Health (COSHH)
Material safety data sheets covering the various replaceable
Purification Packs are available upon request. Contact your local
supplier or distributor.
PURELAB Classic Version 2 11/15
as
WARNING
WARNINGS
ARE
FAILING
TO
OBSERVE
INSTRUCTION
COULD
INJURY OR DEATH TO PERSONS.
Cautions are given where failure to
observe the instruction could result in
damage to the equipment, associated
equipment and processes.
THIS APPLIANCE MUST BE EARTHED.
UNDER NO CIRCUMSTANCES SHOULD
THE
LAMP
BE
CONNECTED
ACTIVATED
WHEN
HOUSING.
ELGA
and
CAUTION
GIVEN
WHERE
THE
RESULT
IN
AND
OUTSIDE
THE
Hide quick links:
Advertisement
Table of Contents
