Table of Contents
Advertisement
ELGA
Step 5 - Ready New UF
1. UNPACK new Ultrafilter.
2. REMOVE the top and bottom brown caps and discard.
Step 6 - Fit New UF
1. REFIT top and bottom connectors to new UF ensuring
the 'O' rings are correctly located at each end.
2. RECONNECT quick connect coupling.
CAUTION!
3. CLIP the new UF into spring clips.
4. REFIT the UV housing on securing screws.
5. TIGHTEN securing screws.
PURELAB Classic Version 2 11/15
PURELAB Classic Operator Manual
Ensure tubes are fitted to correct
ports.
Page 29
Hide quick links:
Advertisement
Table of Contents
