ELGA PURELAB Classic - US Operator's Manual page 21

PURELAB Classic Operator Manual
Mains power socket
Mains power lead
Electrical Connections
RS232
Level
control
Reservoir Level Connection
Page 16
Fuse
ON/OFF
switch
Reservoir
level
connection
PURELAB Classic Version 2 11/15
Step 4 - Connect Electrical Supply
1. PLUG mains power lead into the mains power socket
on the left-hand side of the PURELAB Classic unit.
2. PLUG mains power lead into mains socket.
Step 5 - Reservoir Level Connection
1. INSERT jack plugs into the level control socket located
at rear of unit and reservoir.
Note: If wall mounting the unit it is recommended
that the jack plug should be inserted prior to
locating the unit on the wall mounting bracket.
ELGA