Operation; Intermittent Recirculation; Manual Dispense - ELGA PURELAB Classic - US Operator's Manual

PURELAB Classic Operator Manual
Manual Dispense Screen
Page 26

6. OPERATION

The PURELAB Classic units have the following modes of operation:
 Intermittent Recirculation
 Manual Dispense
 Sanitization Cycle (See Section 8 - Sanitization Procedure)
6.1

Intermittent Recirculation

The PURELAB Classic intermittently recirculates internally to
maintain water quality It will circulate the water for 5 minutes every 60
minutes in whisper mode.
After dispense the unit will continue to recirculate for a short period
before returning to the intermittent routine.
CAUTION!
6.2

Manual Dispense

Step 1 - Product Quality
1. ENSURE PURELAB Classic is in process mode and
the water quality is satisfactory.
Step 2 - Dispense
1. PRESS Dispense Controller once.
2. ROTATE Dispense Controller clockwise.
3. ADJUST the flow from the unit by rotating the Dispense
Controller as necessary.
4. PRESS Dispense Controller once to stop dispensing
and return to recirculation mode.
PURELAB Classic Version 2 11/15
If the PROCESS button is double
clicked the unit will switch off. To
maintain water quality the unit should
be left switched "on".
ELGA