Real Numbers (Floating Point) - JUMO LOGOSCREEN nt Operating Instructions Manual

9 Entering text and values
9.3.2

Real numbers (floating point)

Sequence
Cursor
positioning
H
Character
deletion
76
To enter real numbers (with a decimal point), each digit of the number (units,
tens, etc.), the decimal point position, and the sign are selected with the
control knob.
- Position the cursor.
- Enter the number or define the decimal point position.
For number entry, the number is inserted at the right of the cursor.
h Select "Cursor" and press the control knob.
The real number is indicated by a blue background.
h Rotate the control knob to move the cursor to the required position, and
then press the control knob.
When a number is entered, it is inserted at the right of the cursor.
When deleting, the digit to the left of the cursor is deleted.
h Position the cursor.
h Select "Delete" and press the control knob.
The character to the left of the cursor will be deleted.
Set the decimal
point position.
To move the cursor within the
entry template.
Close entry and
reject the text input.
Close entry and
confirm the text entered.
Change sign.
Character to left of
cursor is deleted.