Submenu "Set Out": Serial Interface Settings - JUMO 202710/30 Operating Manual

6 Device settings

6.3.2 Submenu "SEt Out": serial interface settings

Overview of the parameters
After calling up the setting menu with
Out", use the
SAL
Lin
Parameter "Out": serial interface
NOTE!
The functions of the serial interface are not supported in this device. The
interface should always be deactivated in order to minimize power consump-
tion.
Use the
Menu/parameter
Press the
setting menu or
press the
measurement mode.
28
All manuals and user guides at all-guides.com
key to select the parameter to be configured.
mg/l kOhm mS µS
CAL
3
nLF AL Logg %/K 1/cm
and keys to deactivate the interface:
Setting option
oFF
Ser
key to save the setting and move to the next submenu of the
key to save the setting, quit the device settings, and return to
and selecting the submenu "SEt
Meaning
Interface deactivated.
Minimizes the power consumption of the
device
Interface activated.
Not supported in this device; increases
the power consumption of the device!