Section 1: Introduction; Preliminary Comments And Safety Precautions; Warranty And Liability Information; Safety Precautions - Eaton Cutler-Hammer IQ 300 Series Instructions For Installation, Operation And Maintenance

SECTION 1: INTRODUCTION

1.1

PRELIMINARY COMMENTS AND SAFETY PRECAUTIONS

This Technical Document covers most aspects of installation, operation, and unit-
level maintenance of the IQ 300. This document is a guide only for authorized and
qualified personnel who select and use the IQ 300. Please refer to the specific
WARNING and CAUTION in this section before proceeding. If you require further
information regarding a particular installation, application or maintenance activity,
contact your Cutler-Hammer representative.
1.1.1

Warranty and Liability Information

No warranties, expressed or implied, including warranties of fitness for a particular
purpose of merchantability, or warranties arising from course of dealing or usage of
trade are made regarding this information, recommendations, and descriptions
contained herein.
1.1.2

Safety Precautions

All safety codes, safety standards, and/or regulations must be strictly observed in the
installation, operation, and maintenance of this device.
THE WARNINGS AND CAUTIONS INCLUDED AS PART OF THE
PROCEDURAL STEPS IN THIS DOCUMENT ARE FOR PERSONNEL
SAFETY AND PROTECTION OF EQUIPMENT FROM DAMAGE. AN
EXAMPLE OF A TYPICAL CAUTION LABEL IS SHOWN ABOVE. THIS
WILL HELP TO ENSURE THAT PERSONNEL ARE ALERT TO WARNINGS
WHICH MAY APPEAR THROUGHOUT THE DOCUMENT.
COMPLETELY READ AND UNDERSTAND THE MATERIAL PRESENTED
IN THIS DOCUMENT BEFORE ATTEMPTING TO INSTALL, OPERATE OR
USE THE EQUIPMENT. IN ADDITION, ONLY QUALIFIED PERSONS
SHOULD BE PERMITTED TO PERFORM ANY WORK ASSOCIATED WITH
Effective Date: 2/04
For more information visit:
IQ 300
WARNING
CAUTION
www.cutler-hammer.eaton.com
Effective Date: 2/04
IL17574C
Page 1-1
Page 1-1