Min/Max Data Display Mode; And 4 Wire Systems - Eaton Cutler-Hammer IQ 300 Series Instructions For Installation, Operation And Maintenance

IL17574C IQ 300
Page 4-10 Effective Date: 2/04
4.8

MIN/MAX DATA DISPLAY MODE

4.8.1 3 and 4 Wire Systems

These screens, shown in figure 4.6, display the minimums and maximums of values
monitored by the IQ 300 for a 3 wire system. Figure 4.7 displays the minimums and
maximums of values monitored for a 4 wire system.
Select Min/Max Data from the main menu options. The list in figure 4.6 and 4.7 are
displayed as the scroll arrows are pressed. Note how the Enter button moves you
forward through the list.
Also note that the LD and LG shown on some of the screens are interchangeable
depending on the system value being displayed. If the value is leading, LD will be
displayed; if the value is lagging, LG will be displayed. See section 4.4 Displayed
Sign Convention for additional information.
Page 4-10 Effective Date: 2/04
For more information visit: www.cutler-hammer.eaton.com