Muratec F-360 Operating Instructions Manual page 15

Getting started
7
— Any function can be started by first pressing this key and then enter-
MENU
ing the function number.
8
— Press to display one-touch and speed-dial entries sorted
TEL INDEX
alphanumerically, as in a telephone directory. (See page 3.8.)
9
— This key confirms user settings, begins operations, and moves
ENTER
through command levels.
10
Cursor Keys
— Scrolls (moves) through features and command options as dis-
played on the .
LCD
11
— Press to delete characters on the
CANCEL
have entered into the machine.
12
— Press to redial the last number you dialed.
REDIAL
13
— Press to go back to the previous step.
BACK
14
Select function keys — These keys correspond to the items at the lower
part on the . Press to choose item at the lower part on the
LCD
15
Liquid crystal display (
see what you're programming into the machine. The display shows 4 lines, 30
characters per line. If the
16
contrast key — Press to adjust the contrast level of the
LCD
17
light — Glows when the machine is receiving an incoming
MEMORY RECEIVE
fax document into its electronic memory.
18
. light — Glows when the machine is communicating with another
COMM
machine.
19
light — Glows when a problem occurs during fax communication,
ALARM
printing or scanning. The light stays on until the machine prints a Check
Message report.
1.4
and cancel commands you
LCD
) — Shows the machine's status and lets you
LCD
is blank, the machine is off.
LCD
.
LCD
20
Macro Keys — Programming the Macro keys (
many steps of the operation to a simple press of a key. You can "teach" the
Macro keys to carry out one of the several operations (see pages 3.18–3.21).
display.
LCD
21
Programmable One-touch Keys — The keys labeled 57 to 60 let you teach
your machine an advanced multi-step function just once, and then recall the
function at any time by pressing one of these keys.
22
One-touch Keys — The keys labeled 01-56 offer one-touch dialing conve-
nience.
20 22
Flip Tab A Flip Tab B Flip Tab C Flip Tab D
21
1, 2 and 3) can reduce
M M M