Muratec F-360 Operating Instructions Manual page 94

4
Using the cursor key, select the mode you want. Then press
shows the machine's current clock setting:
5
If you want security reception to begin now (and at this same time every day),
skip to step 7.
Otherwise, go on to step 6.
6
Use the numeric keypad to enter the time (use a 24-hour format) when secu-
rity reception should begin every day. "Type over" the numbers displayed.
To change a digit, press to move to the left, or
the correct digit.
7
Press to save the setting.
ENTER
Note: After setting for activating the security reception, you can assign the secu-
rity reception to the Soft key (see page 3.17) to turn it on and off. Turning on
the security reception by pressing a Soft key is not effected the time setting
you entered at step 6. It begins the security reception immediately.
To turn the security reception on by pressing a soft key:
1
Program a Soft key for security reception. (See page 3.17.)
2
Press a Soft key that is assigned for security reception.
3
Enter the protection passcode and then press
Note: To turn the security reception off, see "Printing from security
reception/Turning off security reception," next column.
. The
ENTER LCD
to move right. Then enter
.
ENTER
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine's
memory and the light comes on. But the incoming fax message is
MEMORY RECEIVE
not printed.
To retrieve the faxes received during this security reception (and to return your
machine to normal reception until the next time):
1
Press , 4, 3, 0, 4, .
MENU ENTER
If you using the Soft key, press the Soft key instead of this operation.
In which way, the shows:
LCD
2
Use the numeric keypad to enter the passcode.
3
Press .
ENTER
• If you've entered the correct passcode, your fax machine will print all docu-
ments in its memory and then erase them. Then it will turn security
reception off until the next time you've scheduled security reception or the
Soft key which programmed security reception is pressed.
If you using the Soft key, the
• If you've entered an incorrect passcode, your fax machine will refuse to
print, and security reception remains on.
Advanced features
light of the Soft key will be off.
LED
3.47