Muratec F-360 Operating Instructions Manual page 78

34
Select "Erase Tx Doc" and press
Erasure of transmitted documents tells your machine if it should erase a docu-
ment from the box after a caller retrieves (polls) the document.
ON: Your machine erases the document from the box as soon as it sends it. If
you choose "On", this box can be polled only once per document.
OFF: Your machine does not erase a document from the box when it's polled.
As long as your machine holds
ment from the box, the document is available indefinitely for polling.
35
Using the cursor key, select the mode you want.
Press and skip to step 46.
ENTER
If you chose Relay:
36
The shows:
LCD
37
Enter the box name, the sub-address and the password for the F-Code box as
described in steps 8-17.
38
Press . The shows:
ENTER LCD
39
Select "Location" and press
Enter the fax number using a one-touch key, a speed-dial number or a call
group number. You cannot use the numeric keypad to enter these numbers.
You can specify up to 300 numbers for a remote unit.
. The shows:
ENTER LCD
power and you do not erase the docu-
AC
. The shows:
ENTER LCD
Note: If you want to review the numbers you entered, press [Review].
If you want to erase any number, move the cursor on it and press
[Erase].
When you finish to review, press [Return] to return to the previous
display.
40
Press . The shows:
ENTER LCD
41
Select "TTI Type" and press
The machine asks for the type of
relayed to other callers.
• Sender — Relay the document with sender unit's
• Both — Relay the document with both the sender unit's
• Yours — Relay the document with your
42
Using the cursor key, select the mode you want.
43
Press . The shows:
ENTER LCD
Advanced features
. The shows:
ENTER LCD
you want to appear on the faxes that are
TTI
(don't send your
TTI
and your
TTI
instead of the sender unit's.
TTI
).
TTI
.
TTI
3.31