Redialing - Muratec F-360 Operating Instructions Manual

Redialing

Automatically fax redialing
If your fax call fails, your machine automatically redials it. In this Auto Redial
mode, your fax automatically redials the number up to two times at one minute inter-
vals.
Note: You can change the redial time and interval settings. (See "Changing redial
settings," page 4.5.)
While in the Auto Redial mode, "AutoRedial" appears on the upper right of the
and the machine can continue to receive faxes and can make as many as 99 fax
transmissions.
Note: If you used either the
MONITOR
must redial manually (see below).
Note: If the last redial attempt fails, your machine may print (and/or display)
error messages.
Redialing manually
You can always redial calls manually. And you must redial manually if you used
either the / key or an optional handset to dial the failed call.
MONITOR CALL
To redial a fax call manually without using the
optional handset:
1
Set the document and set the resolution and contrast.
2
Press ( ). The will show:
REDIAL LCD
3
Your machine can remember the last 10 dial numbers. Press
dial number you want to redial appears.
4
Press .
START
/ key or a handset to dial the call, you
CALL
/ key or an
MONITOR CALL
or
To redial a fax call manually with the
handset:
1
Make sure the document is in the ADF and that the resolution and contrast
are set.
2
Press
MONITOR
3
Press (
REDIAL
,
LCD
4
Your machine can remember the last 10 dial numbers. Press
dial number you want to redial appears.
5
When you hear fax tones from the remote unit, press
Note: If a person answers the phone, use the optional handset to tell that
person you're sending a fax. When you hear fax tones, press
To redial a voice call manually using the optional handset:
1
Lift the optional handset to get a dial tone.
2
Press (
REDIAL
3
Your machine can memory the latest 10 dial numbers. Press
dial number you want to redial appears.
4
Press .
START
When the other person answers, use the optional handset to speak to that
person.
until the
/
MONITOR CALL
/ or lift the optional handset to get a dial tone.
CALL
). The will show:
LCD
). The will show:
LCD
Basic operation
key or an optional
or until the
.
START
.
START
or until the
2.5