Muratec F-360 Operating Instructions Manual page 96

5
Press to save the .
ENTER PIN
Note: If you press without entering the
ENTER
indicates "Invalid Number" on the
Now you may autodial the number as usual.
Important: While in Mode 1, any autodialer numbers you use must include
PIN
the . This also applies to autodialer numbers used with batch
PIN
transmission (see page 3.12) or programmable one-touch keys (see
pages 3.38–3.45).
Note: If you select either Mode 1 or Mode 2 and will be using batch transmission,
you must store the access code for the remote unit within the appropri-
PIN
ate batch box.
If you chose "Mode 2" — as you autodial, load the code
In this mode, you don't have to add the
enter the manually each time you autodial:
PIN
1
Dial the number as you normally would, using the autodialer. Here, we've
pushed one-touch key 01. The machine now asks for the
2
Use the numeric keypad to enter the
3
Press . Your machine dials the number.
START
Note: If you select either Mode 1 or Mode 2 and will be using batch transmission
(see page 3.12), you must store the
within the appropriate batch box.
, the fax machine beeps,
PIN
and then returns to step 4.
LCD
to the autodialer setting. Instead, you
PIN
.
PIN
.
PIN
access code for the remote unit
PIN
Dialing from the numeric keypad while using the
If you've specified Mode 1 — use "star" power
1
Enter the phone number, then press the * ("star") key and enter the
The always goes last. For example, to dial 19725550911 with a
PIN
"123456", enter 19725550911*123456:
2
Press . The disappears from the display, and your machine dials the
START PIN
desired phone number.
If you've specified Mode 2 — the machine guides you
1
Enter the phone number as usual.
2
Press . The shows:
START LCD
3
Use the numeric keypad to enter the
4
Press . Your machine dials the number.
START
Advanced features
mask
PIN
.
PIN
of
PIN
.
PIN
3.49