Setting Ecm; Quick Memory Transmission; Tti Transmission - Muratec F-360 Operating Instructions Manual

Plain-paper digital fax
Hide thumbs Also See for F-360:
Table of Contents

Advertisement

Changing the default settings
Setting
ECM
Default setting: ON.
"Line noise," or static on the line during a call, can easily disrupt the flow of data
from one fax machine to another.
That's why your fax machine gives you the option of using Error Correction Mode
(
). When two fax machines communicate while running in
ECM
machine automatically checks the data as it sends. If the receiving fax machine can't
verify the transmission, the first machine will re-send it as necessary.
Note:
gives you a better chance of transmitting a fax document over a bad
ECM
phone line, but it could also slow down the transmission time. The worse a
line is, the slower the transmission. That's why the machine lets you turn
on or off as needed.
ECM
Note: Not all fax machines have
a fax machine not currently using
transmission from a usual, non-
1
Press
, 2, 2, 0, 9,
MENU
ENTER
2
Using the cursor key, select the mode you want.
Then press
to save the setting.
ENTER
Memory transmission
Default setting: ON.
Note: When the machine's memory is full, it can transmit only through the docu-
ment feeder (real time transmission).
To change the default setting of memory transmission:
1
Press
, 2, 2, 0, 6,
MENU
ENTER
2
Using the cursor key, select the mode you want.
4.2
, the sending
ECM
. If you've activated
and then transmit to
ECM
ECM
, there will be no change in the fax
ECM
transmission.
ECM
. The
shows the current
setting:
LCD
ECM
. The
shows:
LCD
Then press
to save the setting.
ENTER
If the
light glows, memory transmission is on.
MEMORY TRANSMIT
If the
light doesn't glow, memory transmission is off.
MEMORY TRANSMIT

Quick Memory transmission

Default setting: ON.
Important: Your fax machine's memory transmission feature must be turned on
to use Quick Memory transmission (see left column).
To change the default setting of Quick Memory transmission:
1
Press
, 2, 2, 0, 7,
. The
MENU
ENTER
2
Using the cursor key, select the mode you want.
Then press
to save the setting.
ENTER

TTI transmission

Default setting: ON.
Every fax page you send arrives at the receiving machine with a single line of text
at the very top of the page. This text lists a name, called the Transmit Terminal
Identifier (
), and a fax number. You can set the machine to not send the
TTI
1
Press
, 2, 2, 0, 8,
. The
MENU
ENTER
2
Using the cursor key, select the mode you want.
Then press
to save the setting.
ENTER
shows:
LCD
TTI
shows:
LCD
.

Advertisement

Table of Contents
loading

Table of Contents