Hartmann Veroval BPM25 Instructions For Use Manual page 92

English
GB
Nominal voltage: DC 3V
Power supply: 2× 1.5V alkaline manganese (AAA/
LR03) batteries
Battery capacity: about 1,000 measurements
Protection against Internal power supply ME device of
electric shock: applied part: Type BF
Protection against IP22 (not protected against moisture)
harmful ingress
of water or solid
materials:
Inflation pressure: about 190 mmHg for first measurement
Automatic switch- 1 minute after measurement / otherwise
off function: 30 sec.
Cuff: For wrist diameters of 12.5–21 cm
Memory capacity: 2 × 100 measurements with average
of all measurements and morning /
evening average of the last 7 days
Operating condi-
tions:
Storage / transport
conditions:
Serial number:
Computer interface
to PC:
92
Ambient temperature: +10°C to +40°C
Relative humidity: ≤ 85%, non-con-
densing
Atmospheric pressure:
800 hPa – 1050 hPa
Ambient temperature: -20°C to +50°C
Relative humidity: ≤ 85%, non-condens-
ing
inside the battery compartment
The USB cable and the Veroval
connect software enables the measured
value memory to be read and a graph-
medi.
®