Hartmann Veroval BPM25 Instructions For Use Manual page 75

Instructions for calibration mode
A functional check of the monitor can be carried out on people
or using a suitable simulator. A metrological check involves
testing for leaks in the pressure system and possible deviations
in the pressure reading. Remove at least one battery to switch
to calibration mode. Now hold the START/STOP button down
and re-insert the battery. Release the button after a few seconds
and, after a few moments, 'FA(' will appear on the display.
'PSr' and '01' will then appear. Press the START/STOP button
briefly. '000' and '0' will appear on the display. Instructions
on the metrological check will be supplied by HARTMANN upon
request to the competent authorities or authorised maintenance
providers.
Disposal information
To protect our environment, empty batteries must not be dis-
posed of in household waste. Please comply with the relevant
waste disposal regulations or use public collection points.
This product is subject to the European Directive 2012/19/EU
on Used Electrical and Electronic Equipment and is marked
accordingly. Never dispose of electronic equipment in your
household waste. Please obtain information about local
regulations on the proper disposal of electrical and
electronic products. Proper disposal protects the envi-
ronment and human health.
75
English
GB