Hartmann Veroval BPM25 Instructions For Use Manual page 74

English
GB
Safety information concerning the monitor
This blood pressure monitor is not waterproof!
This blood pressure monitor is made of high-quality electronic
precision components. The accuracy of the measured values
and the lifetime of the monitor depend on careful handling.
Protect the monitor from violent impact, knocks or vibrations
and do not let it drop on the floor.
Do not excessively bend or fold the cuff.
Never open the monitor. The monitor must not be modified,
dismantled or repaired by the user. Repairs may only be car-
ried out by authorised specialists.
Do not inflate the cuff when it is not properly applied to the
wrist.
Do not expose the monitor to extreme temperatures, humidity,
dust or direct sunlight because this may cause it to malfunc-
tion.
Keep the packaging, batteries and monitor out of the reach
of children.
Please comply with the storage and operating conditions
defined in Chapter 12 Technical data. Storage or use outside
the specified temperature and humidity range can affect the
accuracy of the measurement or the function of the monitor.
Do not use the monitor near strong electromagnetic fields and
keep away from radio equipment or mobile phones. Portable
and mobile high-frequency and communication devices, such
as telephones and mobile phones, can impair the functionality
of this electronic medical device.
Instructions for the metrological check
Every Veroval monitor has been carefully tested by HARTMANN
®
for measurement accuracy and has been developed with a view
to a long service life. We recommend carrying out a metrolog-
ical check every 2 years for devices in professional use, for
example, in pharmacies, medical practices or hospitals. Please
also observe the national regulations specified by the legislator.
Metrological checks may only be carried out by the competent
authorities or authorised maintenance providers against cost
reimbursement.
74