'PC' is displayed on the blood pressure monitor.
Start the data transfer using the 'medi.connect' software. An
animation is shown on the display during data transfer. A suc-
cessful data transmission is shown on the display of the blood
pressure monitor as in Fig. 1.
A successful data transmission is shown on the display of the
blood pressure monitor as in Fig. 2.
In that case, remove the connection to the PC and start the data
transfer again. The blood pressure monitor switches off automati-
Fig. 1
Fig. 2
cally after 10 seconds of inactivity and when communication with
the PC is interrupted.
87
English
GB