Table of Contents
Advertisement
HD9010TM High Definition Time Code Master Manual
VCG FIELDS
Vcg fields: off
Vcg fields: on
VCG SYMBOLS
Vcg symbols: off
Vcg symbols: on
3.6.3. Selecting and Positioning the Individual Character Inserter Windows
Separately positional character windows displaying the generator time and user bits are available.
There are also separate windows for the ATC, LTC and auxiliary LTC reader time and user bits. The
SHAFT ENCODER knob in conjunction with the HORZ and VERT keys controls the position of the
character windows. The VCG CONTROL ON/OFF key selects whether the video character generator
(VCG) keyer is on or off. The use of these keys in combination with the VCG CONTROL SELECT key
selects which windows are displayed and their position on the screen.
Press VCG CONTROL SELECT to enable the Window Select mode. All the character windows will
appear on the screen with the window for the generator time highlighted. Use the CHAR GEN ON/OFF
key to turn the Time window on or off. Use the VSIZE key to turn set the vertical size of the character
window. Use the VCG CONTROL ON/OFF key to turn the highlighted window on or off. Press and
hold the HORZ key and turn the SHAFT ENCODER knob to move the window horizontally. Press and
hold the VERT key and turn the SHAFT ENCODER knob to move the window vertically. Turn the
SHAFT ENCODER knob without any keys held down to select the next window and then turn it on or
off and move it to the desired location in the same way. The HD9010TM returns to the normal VCG
display mode after the last window has been selected. Windows that were turned off in Window Select
mode will disappear.
3.6.4. Positioning the Overall Character Display and Turning it On and Off
In the normal VCG display mode when none of the windows are highlighted, the CHAR GEN ON/OFF
key turns the character keyer on and off.
When the VCG DISABLE GPI has been activated, you cannot turn the character
windows on using the CHAR GEN ON/OFF key.
In the normal VCG display mode, when none of the windows are highlighted, the arrow keys (, ,
, ) move all the displayed windows by the same relative amount. For example, to move the time
and source ID/status windows both down by one line press the key.
Page 3-20
The VCG FIELDS menu item is used to select whether the fields will be
shown when the time is displayed in the character inserter.
Select Vcg fields off to hide the time code fields.
Select Vcg fields on to show the time code fields.
The VCG SYMBOLS menu item is used to select whether the symbols
will be shown when the time is displayed in the character inserter.
Select Vcg symbols off to hide the symbols.
Select Vcg symbols on to show the symbols.
Revision 2.4.1
OPERATION
Advertisement
Table of Contents
