IP Address and Web UI ......................................10 Channel Settings ........................................ 11 Configuration Menu ......................................12 Upgrading Your Device ....................................... 13 Factory Defaulting Your Device ..................................14 Formatting USB Drives ......................................15 Specifications ..........................................15 - 2 of 15 - Contents Subject to Change av.evertz.com Rev 03...
11. Never push objects of any kind through the slots/ports of this product as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. 12. Never spill liquid of any kind on the product. - 3 of 15 - Contents Subject to Change av.evertz.com Rev 03...
Page 4
16. Upon completion of any service or repairs to this product, ask the service technician to perform routine safety checks to determine that the product is in safe operating condition. - 4 of 15 - Contents Subject to Change av.evertz.com Rev 03...
PSU2 for redundancy. Having the one power adapter connected is a requirement while having a secondary power adapter connected for redundancy purposes is optional. Figure 2. ATOM-USB PSU Sockets - 5 of 15 - Contents Subject to Change av.evertz.com Rev 03...
FlashBench USB benchmark website or run your own test using a USB speed test application such as - 6 of 15 - Contents Subject to Change av.evertz.com Rev 03...
Note: When using the Web UI control panel the time remaining indicator will show the time remaining before the USB drive reaches its capacity, based upon the configured codec and bitrate. Figure 6. ATOM-USB Web UI Time Remaining Field - 7 of 15 - Contents Subject to Change av.evertz.com Rev 03...
When the green LED dims, the USB flash drive has safely been ejected and the drive may be removed. - 8 of 15 - Contents Subject to Change av.evertz.com Rev 03...
Web UI and click on the Set Date/Time button. Note: See the Configuration Menu section on page12 for more information regarding the Set Date/Time setting. - 9 of 15 - Contents Subject to Change av.evertz.com Rev 03...
View error messages. View end of drive countdown duration/time. Configure network and system settings. Enable/disable debug tools. Figure 10. ATOM-USB Web UI Main Page - 10 of 15 - Contents Subject to Change av.evertz.com Rev 03...
Record Button: Allows you to start and stop a recording. Eject: Allows you to safely eject the USB flash drive connected to the respective channel port. - 11 of 15 - Contents Subject to Change av.evertz.com Rev 03...
+ and – buttons to increase and decrease the values accordingly and then click on the Set button to apply the defined date and time. - 12 of 15 - Contents Subject to Change av.evertz.com Rev 03...
Web UI to access the Configuration Menu. Click the Software Update button located under Admin Tools. Figure 14. Configuration Menu Software Update Button - 13 of 15 - Contents Subject to Change av.evertz.com Rev 03...
20 seconds, followed by the unit rebooting. Once the device has finished the boot up process, the device will have reverted its IP address back to 192.168.1.168 along with this factory default settings. - 14 of 15 - Contents Subject to Change av.evertz.com Rev 03...
11–20W, subject to model Power Consumption Silver/Grey Case Finish 17.3in x 1.7in x 13.8in (440mm x 44mm x 350mm) Dimensions (W x H x D) 2.86-4.41lbs (1.3–2.0kg, subject to model) Weight - 15 of 15 - Contents Subject to Change av.evertz.com Rev 03...
Page 16
Evertz AV and the Evertz AV logo are either trademarks or registered trademarks of Evertz Microsystems Ltd. Other trademarks, registered trademarks, and trade names mentioned in this document may refer to either the entities claiming the marks and names or their products and are hereby acknowledged.
Need help?
Do you have a question about the ATOM-USB REV03 and is the answer not in the manual?
Questions and answers