Table of Contents
Advertisement
HD9010TM High Definition Time Code Master Manual
CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING OF THE
GROUND PIN OF THE MAINS PLUG MUST BE MAINTAINED
2.4.
CONNECTING THE VIDEO
2.4.1. High Definition Video Input
The high definition program video source should be connected to the HD INPUT BNC. The HD9010TM
can be configured to auto detect one of the high definition digital video in the formats shown in Table 2-5
or set manually to match the incoming video type using the Video Standard Menu.
The Video LED indicator will be On when there is video present matching the selected video type. When
it is blinking it indicates that there is video present but the VIDEO TYPE menu item does not match the
input video format.
The HD9010TM requires a stable video input for normal operation.
2.4.2. High Definition Video Output
The HD BYPASS and HD OUTPUT outputs contain the input high definition video with RP215 ancillary
data (VANC) and optional characters keyed in. Connect one of these outputs to any input on your system
that accepts SMPTE 292M serial digital video. The three outputs are identical except that the HD
BYPASS output may be protected by an optional bypass relay (+HBP option). When the relay is active,
the HD BYPASS output is directly connected to the HD INPUT, and the other two HD OUTPUTS will
have no video output.
Page 2-4
Revision 2.4.1
INSTALLATION
Advertisement
Table of Contents
