Table of Contents
Advertisement
HD9010TM High Definition Time Code Master Manual
LOAD
Is used to load one of the saved user presets into the HD9010TM. The Front panel prompts
you to enter the preset number you want to load:
Use one of the numbered keys to select the preset to load. The Front panel shows the
preset number and the video standard of the preset:
To select another preset to load press one of the numbered keys. To confirm the preset load
press the SELECT key. The front panel shows:
When you load a user preset you will overwrite all the settings of the HD9010.
3.1.7. An Overview of the SHIFT Key functions
When the SHIFT key is held down, the meanings of some of the keys are modified, gaining quick
access to a wider variety of functions. Following is a summary of the shifted key functions.
When you are entering user bits into the Generator, holding the SHIFT key while you press the numeric
keys 0 through 5 will change their entered values to the hexadecimal values A through F.
When you are selecting values in the menus, holding the SHIFT key while you turn the SHAFT
ENCODER knob will advance the values faster.
SHIFT+JAM
SHIFT+PANEL LOCK
3.1.8. Shaft Encoder Knob
The shaft encoder's function is to select various menu items or change the value of a menu item's
parameter value.
SHAFT ENCODER
When in one of the Setup menus, the SHAFT ENCODER knob is used to move
to various items in the menu system or change a menu item's parameter value. (See
section 3.3)
When in VCG Window Select Mode, the SHAFT ENCODER knob in conjunction with the
HORZ and VERT keys is used to position the individual character windows. (See
section 3.3)
conjunction with the HORZ and VERT keys is used to position all the character windows.
(See section 3.3)
When the DISPLAY LED is On, the SHAFT ENCODER knob is used to select what is
displayed on the front panel display.
Page 3-4
Preset load
Ld 3 AUTO-I/60 ?
Ld 3 AUTO-I/60 >
Enters or cancels the continuous jam sync mode.
Enters or cancels the panel lock mode.
When not in VCG Window Select Mode, the SHAFT ENCODER knob in
Revision 2.4.1
#?
OPERATION
Advertisement
Table of Contents
