Table of Contents
Advertisement
HD9010TM High Definition Time Code Master Manual
3.2.
FRONT PANEL DISPLAY FUNCTIONS
3.2.1. Front Panel Displays
The DISPLAY key is used to select what data is being displayed in the alphanumeric display. After you
press the DISPLAY key, you can use the shaft encoder knob to select the various Display items. The
leftmost characters of the display indicate what is being displayed as follows:
GTM
12:34:56.00
GUB
12 34 56 78
LTM
12:34:56.00
LUB
12 34 56 78
XTM
12:34:56.00
XUB
12 34 56 78
ATM
12:34:56.00
AUB
12 34 56 78
COM1: ?????
COM2: ?????
GPI: 111111111
OFS
12:34:56.00
SYN
12:34:56.00
VID
AUTO I/60
3.2.2. Special Front Panel Indicators
The following special indicators are used between the seconds and frames digits of the front panel time
display to identify non-drop frame and drop frame code when the time code is counting at 29.97 frames
per second.
Non Drop Frame
Drop Frame
3.3.
AN OVERVIEW OF THE SETUP MENU SYSTEM
The key to the operational flexibility of the HD9010TM lies in the Setup menu system. The Setup menu
system uses the 16 digit alphanumeric display and provides a quick, intuitive method of configuring
HD9010TM, guiding you to the correct setup for your application.
The HD9010TM menu system consists of four main menus with several choices for each menu item.
The GEN, RDR, VCG and UTIL keys allow you to quickly go to various parts of the menu while the
SELECT, ESC and SHAFT ENCODER knob are used to navigate the menu. See Figure 3-2.
Page 3-6
Generator time information
Generator user bit information
LTC Reader time information
LTC Reader user bit information
AUX LTC Reader Time information
AUX LTC Reader user bit information
RP188 Ancillary Reader Time information
RP188 Ancillary user bit information
Com 1 status information
AUX COM status information
GPI Input status information
Jam Sync Offset Register
Drop Frame Conversion Sync Point
Current video standard
Colon (:)
Period (.)
Revision 2.4.1
OPERATION
Advertisement
Table of Contents
