Turning The Atc Generator On; Setting The Atc Packet Type - evertz HD9010TM Instruction Manual

Table of Contents

HD9010TM High Definition Time Code Master Manual

The drop frame and colour frame modes of the code being read are transferred to the generator during

jam sync. The formatted modes return when the Jam sync mode is terminated.



When the GEN DROP FRAME mode is set to Convert, the drop frame mode of the

generator operates in a special way. See section 3.4.7.1.

The OFFSET register for the Continuous Jam Sync mode allows you to apply a continuous offset

between the generator and reader numbers when you are in Continuous Jam Sync mode. The value

entered into the Offset register will be added to the reader time before it is jammed into the generator.

Offset values other than 00:00:00:00 usually indicates that the generator is leading the reader. In order

for the generator to lag behind the reader, enter a value equal to 24:00:00:00 minus the lag offset

desired. To access the OFFSET register press the DISPLAY buttons one or more times or press the

DISPLAY button and turn the SHAFT ENCODER until the display prompt shows

3.4.5. Turning the ATC Generator On

The ANC GEN ON/OFF key is used to turn the Ancillary Time code (ATC) inserter on and off. (You

must exit the Setup menu to turn the ATC generator on or off.) When the ATC generator is Off, the

program video passes through the ATC keyer with nothing added. When the ATC generator is On, the

RP188 ancillary time code and the VANC data packet will be added to the program video.

GEN ATC TYPE

ATC gen:ltc

ATC gen:vitc

ATC gen:ltc+vitc

Page 3-12

The SMPTE RP188 recommended practice for Ancillary Timecode

(ATC) identifies two types of ATC packets. The GEN ATC TYPE menu

item is used to select whether the ATC generator will insert LTC, VITC

or both types of ancillary timecode packets.

Select ATC gen:ltc to insert LTC type ATC packets.

Select ATC gen:vitc to insert VITC type ATC packets.

Select ATC gen:ltc+vitc (default) to insert both LTC and VITC type

ATC packets.

Revision 2.4.1

OFS

OPERATION

Table of Contents