Table of Contents
Advertisement
HD9010TM High Definition Time Code Master Manual
3.4.9. Configuring how the Continuous Jam Sync Mode Works when there is no Primary
Reader Code
GEN NO CODE JAM
No code jam: run
No code jam: hold
No code jam: mute
3.5.
CONFIGURING THE READERS
The READER SETUP menu is used to set up various items related to the input references of the
HD9010TM. The chart below shows the items available in the READER SETUP menu. Sections 3.5.1
to 3.5.5 give detailed information about each of the sub-menus.
PRIMARY READER
ATC RDR TYPE
ATC RDR MODE
LTC RDR MODE
AUX LTC RDR MODE
Page 3-16
The GEN NO CODE JAM item controls the operation of the continuous
jam sync mode when there is no incoming code to the primary reader.
Select No code jam run when you want the generator to free run when
there is no incoming Reader code. When the reader code resumes, the
generator will re-jam to the incoming code. Using this mode will allow
the user to repair large dropouts in the incoming code. The generated
code will be continuous if the incoming code is also continuous.
Select No code jam hold when you want the generator to stop when
there is no incoming Reader code. When the reader code resumes, the
generator will re-jam to the incoming code. Use this mode if you want
the output of the generator to stop on the last number read when you
stop the tape machine supplying the incoming code to the reader.
Select No code jam mute when you want to turn off the generator when
there is no incoming Reader code. The generator time will stop at the
last number read. When the reader code resumes, the generator will
turn on and re-jam to the incoming code. Use this mode if you want the
output of the generator to turn off completely when you stop the tape
machine supplying the incoming code to the reader.
Sets the primary reader.
Sets whether the ATC reader will read LTC or VITC RP188 packets or
VANC data packets.
Sets the operating mode of the ATC reader.
Sets the operating mode of the main LTC reader.
Sets the operating mode of the auxiliary LTC reader.
Table 3-2: Top Level of the Reader Setup Menu
Revision 2.4.1
OPERATION
Advertisement
Table of Contents
