Identifying And Testing A Paging Amplifier When Using Informacast 4.0 Or Later - CyberData 011085 Operation Manual

2.4 Identifying and Testing a Paging Amplifier when Using
InformaCast 4.0 or Later
This section describes the basic process for identifying and testing the CyberData Paging Amplifier
when using Singlewire's InformaCast software version 4.0 or later.
Note
Note
To add the Paging Amplifier to the InformaCast server:
1. Click Edit IP Speakers on the Main Screen of the Singlewire Informacast Server Web
2. On the IP Speaker Configuration page, InformaCast will indicate that it has detected new
Operations Guide

Identifying and Testing a Paging Amplifier when Using InformaCast 4.0 or Later

If you have questions or need help, please consult your InformaCast documentation and or
contact the CyberData support team.
CyberData's support is limited to IP endpoint functionality when used with an InformaCast
system.
Interface.
Figure 2-20. Main Screen of the Singlewire InformaCast Server Web Interface
units. Click View.
Edit IP Speakers
930363H
Installing the VoIP V2 Paging Amplifier
CyberData Corporation
25