Updating The Firmware - CyberData 011085 Operation Manual

2.3.3 Updating the Firmware

Note
To update the firmware from your computer:
1. Please contact VoIP Technical Support to obtain the latest Paging Amplifier firmware file by
2. Log in to the Paging Amplifier home page as instructed in
3. Select Browse, and then navigate to the location of the Paging Amplifier firmware file.
Operations Guide
Updating from firmware versions earlier than 2.0.0 require a factory reset after the update
has been completed. This is due to a change in the way that the speaker stores its
configuration file.
submitting a contact form at the following website:
http://support.cyberdata.net/
Configuration Home Page".
Figure 2-17. Upgrade Firmware Page
v3.0.1
930363H
Installing the VoIP V2 Paging Amplifier
Configure the Paging Amplifier Parameters
Section 2.3.2, "Log in to the
CyberData Corporation
21